Aquatel D110-S Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Monitor Aquatel D110-S herunter. Aquatel D110-S 12 Seiten. Wireless level monitor

Display Unit Beeps

The Display Unit will beep to advise you of an event, or alert you to something that

needs your attention.

H – represents a high tone m – represents a medium tone l – represents a low tone

lH – A valid reading has been received from the Tank Unit.

(This beep can be turned off in Settings.)

HHl – Display Unit reads

Tank Unit icon displays . Display Unit can not communicate with Tank Unit.

Check batteries in Tank Unit. Move Display Unit closer to Tank Unit.

Alarms

Alarms display on the Display Unit screen and sound every six seconds for one minute.

To silence the alarm press the menu button – the Display Unit will beep (H L) to

acknowledge. Then investigate the cause of the problem such as weak communication

signal, low battery level ?

High level alarm

Fluid level is above 'High

Level' setting. (This alarm is

automatically cleared when

the liquid level drops 3%

lower than the 'High Level'

setting.)

shows . (as shown in image). There is no communication

with Tank Unit.

and signal strength are displayed. Tank Unit can

communicate with Control Unit but cannot detect

a valid level.

Battery icon beside Display Unit or Tank Unit signal

strength icon. Battery levels low – replace batteries.

l m H

, there are no signal strength bars and the

H l

Tank icon shows and Tank Unit temperature

H l

Tank icon shows , both Tank Unit temperature

– 9 –

low level alarm

H m l

Fluid level is below

'Low Level' setting.

(This alarm is automatically

cleared when the liquid level

rises 3% higher than the

'Low Level' setting.)