Diamond Needle White Diamond CG-750AJ Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Farbspritzgerät Diamond Needle White Diamond CG-750AJ herunter. Diamond Needle White Diamond CG-750AJ 4 Seiten.

Seite drucken

Operation

1. Fill the reservoir container with spray liquid. Plug into the power supply and

trigger on. The spray gun starts up with a blast of vibration. Initially only a small

amount of liquid sprays out. After 2-3 seconds the spray gun reaches optimal

performance and noise level subsides.

2. Spray distance and pattern:

The effective working distance is 20-25cm (3/4"-1"). The distance and the

pressure need to be adjusted properly according to the thickness and density

of objects. The thinner the object, the farther the distance is required in order

not to damage the fabric. Please refer to Fig. 3 for suggested spray pattern.

Gently move the spray gun at a constant speed until all the stain is eliminated.

(For straight nozzle position, spraying at a 45 degree angle is recommended).

3. Adjustment of spray dispersion: The spray dispersion can be adjusted by

turning the nozzle cap. As seen in Fig.4, turn the small handle on the nozzle

cap clockwise. The spray dispersion becomes linear. Turn the small handle

counterclockwise, spray becomes a mist.

Fig. 4

Fig. 5

4. Adjustment of spraying force: The spray force is determined by rotation of

the knob on the rear of the spray gun. As Fig.5 shows, turn the knob clockwise

to increase spraying force so the liquid sprays out faster and stronger. Turn the

knob counterclockwise to decrease the spraying force so the liquid sprays out

slower and weaker. This adjustment determines the working distance of the