Diamond Products CC1722R Teileliste & Betriebsanleitung - Seite 10
Blättern Sie online oder laden Sie pdf Teileliste & Betriebsanleitung für Säge Diamond Products CC1722R herunter. Diamond Products CC1722R 16 Seiten. Diamond products cc1700 concrete saw parts list & operating manual
Seite druckenWARNING: Failure to comply with the following could result in serious bodily
PERSONAL SAFETY
Read and understand instructions before
operating saw.
Know how to stop the saw quickly in case of
emergency.
Wear boots with non-slip soles to provide
proper footing.
Always wear safety approved hearing, eye,
hand and respiratory protection.
Keep all parts of your body away from blade
and other moving parts.
Use caution when loading and unloading
saw. Always turn off engine.
Stay alert. Use common sense. Do not
operate the saw when tired or after
consumption of any substance that would
impair physical function or rational
judgment.
SAW SAFETY
All safety guards must be in place before
starting the engine.
Do not alter the saw. Any alteration or
modification may result in a dangerous
condition.
Do not leave saw unattended while the
engine is running.
Only operate the saw from behind the
machine with both hands on the handle.
Do not use damaged blades, guards or
personal equipment. Do not disable safety
equipment switches.
Do not operate equipment if there is a fuel
leak.
Use extreme caution when maneuvering saw
on ramps or loading from trucks or trailers.
Use only Diamond Products replacements
parts
Remove the ignition cable from spark plug
before performing saw maintenance or
changing blades to prevent accidental engine
starting.
Remove all tools from the saw before
starting.
When the saw is not in use or when being
transported, remove the blade. Properly
secure the saw to prevent uncontrolled
movement.
10
SAFETY WARNINGS
injury or even death
BLADE SAFETY
Examine cutting blades before each use. Do
not use any blade that has cracks, nicks, or
flaws. The arbor hole should be
undamaged. Use only dry cut Diamond
Products Blades made for cutting green
concrete.
Diamond Products Blades are designed to
only cut uncured concrete. Cutting any
other material may result in blade failure or
a dangerous condition.
Inspect blade flanges for damage, excessive
wear and cleanliness before mounting the
blade. The blade should fit snugly on a
clean undamaged arbor shaft.
Never operate the saw without the FlatTrac
assembly securely in place and in working
order. A damaged blade must be replaced to
protect the operator.
Make sure the blade or the FlatTrac wheels
do not make contact with the ground or any
other surface when maneuvering the saw.
Avoid contacting the blade while it is
rotating.
Never run the saw with a mounted blade
without the blade guard securely attached.
Use only Diamond Products Blades.
WORK AREA SAFETY
Keep visitors, children, animals and Soff-
Cut™ saws out of the area.
Observe all safety regulations for the safe
handling of fuel. Gasoline is extremely
flammable and its vapors can explode if
ignited. Do not refuel in poorly ventilated
areas. Shut off engine and allow to cool
before refueling. Wipe the saw dry if fuel is
spilled on it. Do not smoke while refueling.
Do not operate the saw while smoking or
near an open flame.
Do not operate the saw in areas of
combustible material or fumes. Sparks may
occur from the saw that could cause a fire or
explosion.
Operate only in well ventilated areas.
Engine exhaust contains carbon monoxide
which can cause loss of conscious and
possible death.
The muffler and engine become very hot
during operation. Keep all body parts and
foreign material away from the engine while
running.
Do not expose to rain. Keep work area well
lit and clean.