Diamond Products CSE12 Ersatzteilliste und Betriebshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Ersatzteilliste und Betriebshandbuch für Kettensäge Diamond Products CSE12 herunter. Diamond Products CSE12 20 Seiten. Electric chainsaw
Auch für Diamond Products CSE12: Benutzerhandbuch (20 seiten)
Seite drucken
saw for operations different than intended could result in a hazardous situation.
CAUSES AND OPERATOR PREVENTION OF KICKBACK
Kickback may occur when the nose or tip of the guide bar touches an object, or when the workpiece closes in
and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse reaction, kicking
the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may
push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose
control of the saw which could result in serious personal injury. Do not rely exclusively upon the safety
devices built into your saw. As a chain saw user, you should take several steps to keep your cutting
jobs free from accident or injury. Kickback is the result of chain saw misuse and/or incorrect operating
procedures or conditions and can be avoided by taking proper precautions as given below:
a.
Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both
hands on the saw and position your body and arm to allow you to resist kickback forces.
Kickback forces can be controlled by the operator, if proper precautions are taken. Do not let go of
the chain saw.
b.
Do not overreach and do not cut above shoulder height. This helps prevent unintended tip
contact and enables better control of the chain saw in unexpected situations.
c.
Only use replacement guide bars and saw chains specified by the manufacturer. Incorrect
replacement guide bars and saw chains may cause chain breakage and/or kickback.
d.
Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing
the depth gauge height can lead to increased kickback.
INTRODUCTION
This tool is specifically designed for wet cutting of concrete, masonry and similar materials. It must not be used
for cutting wood or felling trees. Although it is similar in appearance to a wood chain saw, it has significant
differences in principles and techniques which will be detailed throughout this instruction manual. . This
chain saw must not be converted or modified for any other use, other than as specified in these operating
instructions. The user shall be liable for damages and accidents due to incorrect use.
CARTON CONTENTS
•
Chain Saw Motor Head
•
Guide Bar
•
Diamond Chain
•
T-Wrench