Panasonic DLP PT-DZ12000E Spezifikationsblatt - Seite 4

Blättern Sie online oder laden Sie pdf Spezifikationsblatt für Projektor Panasonic DLP PT-DZ12000E herunter. Panasonic DLP PT-DZ12000E 6 Seiten. 3-chip dlp projector

A Host of Functions to Assure Stable, Long-Time Operation
High Reliability & Stability
Auto Cleaning Robot
Panasonic's Auto Cleaning Robot automatically cleans the air filter to
help keep the projector running smoothly. When the projector is
switched on,*
the robot uses a brush to clear away any dust adhering
1
to the filter, helping to prevent clogs that can impair operation or
cause malfunctions. The projector can be used for around 2,000 hours
before the filter needs to be cleaned, making it a good choice for
installation in tight spaces or for ceiling-mounted applications. Also,
the Micro-Cut Air Filter traps particles as small as 10 microns.*
greatly reduces the amount of dust entering the projector, helping
maintain high brightness and stable operation.
� Smoke Cut Filter
The optional ET-SFD100 Smoke Cut Filter
can be mounted in place of the Auto
Cleaning Robot's tray. This optional
smoke filter must be used when using
the projector at events where smoke or
fog is dispersed.
Liquid Cooling System
This advanced system uses a pump to circulate a cooling liquid behind
the DLP
chips to absorb heat. This Panasonic's technology is made
possible by the reflective nature of the DLP
airtight chip structure that minimizes image-quality loss due to dust
adherence. In addition, it allows operation within a wide ambient
temperature range of 0°C (32°F) to 45°C (113°F)*
operating noise to 43 dB.*
4
*
3
The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude
mode (1,400 m [4,593 feet] to 2,700 m [8,858 feet]). Also, if the ambient temperature
exceeds 40°C (104°F) (35°C [95°F] in High-Altitude mode) when using all four lamps, the
light output may be reduced approximately 30% to protect the projector.
*
4
Average value at time products are shipped from the factory, in accordance with JIS X
6911:2003 data projector specifications. Measurement methods and conditions are based
on Article 2 of JIS X 6911:2003 data projector specifications.
Network Function
� Web Browser Control
The PT-DZ12000E can be easily operated remotely over a LAN
network, because it is all done using the computer's familiar web
browser. Furthermore, the projector sends an e-mail message to
notify the operator when an
error has occurred, or a lamp
needs to be replaced.
Lamp LED Indicator and Self-Diagnosis Function
The projector body is equipped with a temperature alarm LED and a
burnt-lamp alarm LED (for lamps 1 to 4). In the PT-DZ12000E, the
LEDs are visible from both front and top, so you can see it easily even
if the unit is hung from the ceiling. Information
on the error is also given in the on-screen
display. A self-diagnosis function is also
provided. Error codes displayed on the 3-digit,
7-segment LED on the side of the projector tell
the operator what the problem is.
This
2
system, which enables an
and reduces
3
Remote control
PT-DZ12000E
LAN
PC
e-mail
PC
Internet
PC
LAN
PC
e-mail
PC
ACR brush
Air filter
*
1
Cleaning time can be set by a timer from 00:00 to 23:50 in 10-minute intervals, or
controlled manually. The cleaning process is done only once per 24 hours. When the set
time is reached, the cleaning process will begin if the projector is on or in cooling mode.
*
2
Such as lint particles and pollen.
Reservoir tank
Radiator
� PJLink™ Compatibility
The LAN terminals support PJLink™ class 1 connection.
Control with the same specifications is also possible when
used in a multi-projector system with projectors of another brand.
� Multi Projector Monitoring & Control Software
Panasonic's original "Multi Projector
Monitoring & Control"* freeware
allows the user to control and monitor
multiple projectors at the same time
via LAN. When a problem occurs, an
alarm message is sent to the
monitoring/controlling PC.
* Available in June 2008. Please consult a sales
representative if necessary.
Made in Japan
PT-DZ12000E projector is carefully manufactured at the Panasonic
factory in Japan under strict quality control. This is another very
important advantage of Panasonic projectors.
DLP
chip
(Green)
DLP
chip
(Blue)
Reservoir tank
3