Panasonic ET-UW100 Betriebshandbuch - Seite 25

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Projektor Panasonic ET-UW100 herunter. Panasonic ET-UW100 26 Seiten. Easy wireless stick
Auch für Panasonic ET-UW100: Broschüre & Specs (2 seiten), Betriebshandbuch (29 seiten), Firmware-Update-Verfahren (6 seiten), Spezifikationen (2 seiten)

Seite drucken

Troubleshooting

Message List

Software

EWSGUIMain

EWSExporter

Downloaded from

ManualsNet.com

(cont.)

Message

Remote is being controlled.

Failed to start "Live Mode".

The projector is in STANDBY.Turn

on the projector power .

Easy Wireless Stick is busy.

Invalid entry.

Cannot start EWSGUIMain because

EWSExporter is already started .

Another user is occupying destina-

tion projector .

"Live Mode" is deactivated.

Failed .

Invalid entry.

Cannot start EWSExporter because

EWSGUIMain is already started .

search engine

Countermeasure

The projector is currently under external control by

using the REMOTE IN terminal .

Switch the input to the network by using the panel for

an external control .

Input selection for the projector may have failed. Switch

the input to the network, and then click the [Live] button

again .

Turn on the power of the projector you want to connect

to, perform the search in the Select Access Port screen

again, and then try connecting again .

The Easy Wireless Stick is in a busy state. Wait a while

and then try again .

Enter the 4-digit number for the projector ID.

EWSExporter is already running . End EWSExporter,

and then try again .

Check the following possible causes.

• Check whether live mode has already been started

by another user.

• Check whether the projector style is set to 4-screen

index style . If it is, change the style other than

4-screen index style using the [NETWORK] menu of

the projector .

• If the Easy Wireless Stick is disconnected during live

mode, the next live mode cannot be started for up

to approximately 30 seconds . Wait a while and then

click the [Live] button again.

Check the following possible causes.

• Check whether live mode has been interrupted by

another user .

• Check whether the power of the projector is off .

If the power is off, turn on the power, perform the

search in the Select Access Port screen again, and

then try connecting again .

• Check whether there are other wireless LAN devices

in the vicinity. If there are, turn off any wireless LAN

device that is not needed before use.

Check whether or not the write destination folder is

write protected, or whether or not there is insufficient

space .

Data other than data exported with EWSExporter can-

not be imported. Use EWSExporter to export the nec-

essary data, and then import that data .

EWSGUIMain is already running . End EWSGUIMain,

and then try again .

– 25 –