Panasonic PT-56HX41 Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Projektor Panasonic PT-56HX41 herunter. Panasonic PT-56HX41 29 Seiten. Color video projection system

Seite drucken

INSTALLA

TION

Installation

Television

Location

This unit can be used as an entertainment

center. Consult your dealer for available options.

[]

Avoid excessive sunlight or bright lights, including reflections.

[]

Keep away from excessive

heat or moisture. Inadequate

ventilation may cause internal

component failure.

[]

Fluorescent lighting may reduce remote control transmitting range,

Keep away from magnetic equipment, including motors, fans and external speakers.

Optional

Cable Connections

Shielded audio and video cables should be used between components. For best results:

[]

Use 75-ohm coaxial shielded cables.

[]

Use appropriate input and output connectors, that match your component connectors.

[]

Avoid long cables to minimize interference.

AC Power

Supply

Cord

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WiTH A

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY

Polarized p lug

INSERTED TO PREVENT BLADEEXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR

PINCHED, PARTICULARLYAT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE

THEY EXIT FROM THE APPARATUS,

Cable

/ Antenna

Connection

For proper

reception,

either a cable or antenna connection

is required.

Cable Connection

IncomingCable

from

Cable Company

Connect the cable supplied by your local cable company to ANTi

connection on back of television. Select cable mode and ANT1 in SET UP

_l,

menu under Prog Chan (Program Channels).

Note:

A cable converter

box may be required

for proper reception.

75OhmVHF/UHF

Check

with

your

local

cable

company

for

compatibility

on backofPTV

requirements.

Antenna Connections

For proper reception of VHF/UHF channels, an external antenna is required. For

best reception, an outdoor antenna is recommended.

Connect

home antenna to ANT1 connection on back of

Incoming Cable from

television. Select TV mode and ANT1 in the SET UP menu

under Prog Chan.

--:,

._ Cable Preset

Cable Mode is preset at the factory,

Antenna usersmustchange to33/Mode and

t ANT 1 in the Set Up menu,

Home Antenna