Panasonic PT-65WX50 Betriebsanleitung - Seite 18
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Projektor Panasonic PT-65WX50 herunter. Panasonic PT-65WX50 36 Seiten. Color video projection system
Auch für Panasonic PT-65WX50: Betriebsanleitung (37 seiten), Betriebsanleitung (34 seiten), Betriebsanleitung (36 seiten)
Seite drucken
PROGRAMMING THE REMOTE!
Programming The Remote
The
Universal
Remote
Control can
be programmed
to operate
many
manufacturers'
components,
using the
component function buttons for VCR, DVD, AUX, TV, CABLE, DBS or RCVR.
Follow the procedures for programming
your Remote Contro! with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
WITH A CODE
Confirm that the external component is plugged in and on.
Tum the component off.
Press the ACTION and POWER button, together, for at least 5 seconds.
Press appropriate component button on the Remote Control. (VCR, DVD, AUX, TV, CABLE, DBS or RCVR)
Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
Press the Remote Contro! POWER
button to test the component.
If the procedure was successful, the
component will turn on.
Helpful Hints: Unsuccessful Code
if the component
does
not operate
with the
Remote
Control,
repeat
the
procedure
using
another
code.
(Some
brands
have
multiple
codes.)
If an incorrect code is entered, or if the procedure
takes longer than 30 seconds, the programming
will fail.
WITHOUT A CODE
This procedure searches all codes and is called the "sequence method".
Confirm that the externa! component is piugged in and on.
Turn the component off.
Press the ACTION and POWER button, together, for at least 5 seconds.
Press appropriate component
button on the Remote Control.
Press the {> button to move forward to the next code. Press the | button to move backward.
Press the Remote Control POWER
button to test the component.
If the procedure was successful, the
component will turn on.
Note:
Repeat the above steps until the component code is found.
It may take many attempts before the
correct code is found.
'
After the code is found, press the ACTION button to store the code.
Write the code numbers from tables in this Space. This will serve as a reference if you need
to program your Remote Control.
Barut
CABLE BOX
oo E
VCR
ano
i