Diamond Tech Powermiter IV Betriebshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Säge Diamond Tech Powermiter IV herunter. Diamond Tech Powermiter IV 5 Seiten. Came saw

warning: Blade is extremely sharp! Keep fingers away from the cutting path of the blade. always wear eye

protection while using this or any other table saw.

B. Blade sharpening and replacement

after extended use, the blade may become worn or dull. a dull blade is detectable by a slower cutting speed or if

the material is left with a jagged or irregular edge. Blade re-sharpening services are available in many communities,

and can be located through a phone directory or your local hardware store. Replace a dull or worn blade with a new

blade for optimal cutting performance.

troubleshooting

problem: work material becomes jammed.

Cause: Dull blade.

solution: Before freeing any jammed materials, turn oFF Power Switch, wait until all moving parts have stopped

and unplug from outlet. Gently rock back and forth to free work materials. inspect blade to be sure teeth are not

bent or broken.

problem: Saw runs slowly or stops while cutting

Cause: Blade is "gummed-up" due to soft materials or tape.

solution: Before cleaning blade, turn oFF power switch and wait until all moving parts have stopped. Unplug from

outlet and clean blade surface.

Item

PLexi-GLaSS GUaRD

anGLe GUiDe

TaBLe

on/oFF SwiTch

moToR 11oV

moToR 220V

4" BLaDe

Page 4 - PowerMiter iv instruction Manual

Item Number

#P605

#P608

#P613

#P618

#P620

#P629

#P629a

#78