Panasonic PT-AX100E Broschüre & Specs - Seite 12
Blättern Sie online oder laden Sie pdf Broschüre & Specs für Projektor Panasonic PT-AX100E herunter. Panasonic PT-AX100E 12 Seiten. High definition home cinema projector
Seite drucken
Specifications
Power supply
100–240 V AC, 50/60 Hz
Power consumption
290 W (Approx. 0.08 W in standby
mode with fan stopped)
Amps
2.2 A–1.0 A
LCD panel*
1
Panel size
0.7˝ (17.78 mm) diagonally
Aspect ratio
16:9 aspect ratio
Display method
Transparent LCD panel (x 3, R/G/B)
Drive method
Active matrix
Pixels
921,600 (1280 x 720) x 3, total of
2,764,800 pixels
Lens
Manual zoom (2x)/Manual focus,
F 1.9 - 3.1, f 21.7 mm - 43.1 mm
Lamp*
2
220 W UHM™ lamp
1
Brightness
2,000 lumens*
3
Contrast
6,000:1*
(full on/full off)
Centre-to-corner uniformity ratio
85%
Colours
Full colour (1,070,000,000 colours)
Projection size
1,016–5,080 mm (40–200 inches)
diagonally, 16:9 aspect ratio
Throw distance
1.2 m–12.4 m (3´11˝–40´8˝)
Screen aspect ratio
16:9 (4:3 compatible)
Resolution
RGB: 1280 x 720 pixels (1920 x 1080
pixels with compression)
Scanning frequency for RGB
Horizontal: 30–70 kHz,
Vertical: 50–87 Hz
*1: The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technology designed to provide one of the
finest possible images. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this is an intrinsic characteristic of the manufacturing
technology that affects all products using LCD technology.
*2: The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or
extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
*3: In AI mode, with dynamic iris on.
*4: Shift range is limited during simultaneous horizontal and vertical shifting.
*5: Excluding protrusions
Dimensions
102.5 (4-1/32)
395 (15-17/32)
Projector Global Web Site
http://panasonic.co.jp/pavc/global/projector
YP
P
signal compatibility
B
R
525i (480i), 525p (480p), 625i (576i),
625p (576p), 750 (720)/50p,
750 (720)/60p, 1,125 (1,080)/24p,
1,125 (1,080)/50i, 1,125 (1,080)/50p,
1,125 (1,080)/60i, 1,125 (1,080)/60p
Colour system
PAL, PAL-M, PAL-N, PAL 60, SECAM,
NTSC, NTSC 4.43,
Optical axis shift*
4
Horizontal ±25% and vertical ±63%
Keystone correction range
Vertical: approx. ±30°
Installation
Ceiling/desk, front/rear
(menu selection)
OSD languages
English, French, German, Spanish,
Italian, Chinese, Korean, Russian,
Swedish, Danish, Norwegian, Polish,
Czech, Hungarian, Portuguese, Thai
Terminals
S-VIDEO IN
Mini DIN 4-pin x 1, Y: 1.0 Vp-p,
C: 0.286 Vp-p, 75 ohms
VIDEO IN
RCA pin x 1, 1.0 Vp-p, 75 ohms
PC (RGB) IN
D-sub HD 15-pin (female) x 1
R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on
G), 75 ohms
HD/SYNC, VD: TTL, high impedance
(positive/negative polarity)
COMPONENT IN
RCA pin (Y, P
/C
, P
B
B
Y: 1.0 p-p, 75 ohms
P
/P
(C
/C
): 0.7 Vp-p, 75 ohms
B
R
B
R
HDMI IN
19-pin HDMI connector x 1
SERIAL
Mini DIN 8-pin x 1 (RS-232C based)
Unit: mm (inch)
Power cord length
Cabinet material
Dimensions*
5
(W x H x D)
Weight
Operating environment
Remote control unit
Power supply
Operation range
Dimensions
(W x H x D)
Weight
Supplied accessories
Optional accessories
ET-LAX100
ET-PKX100
ET-ADSER
/C
) x 1,
R
R
Ecology-Conscious Design
Panasonic strives to minimise environmental
impact caused by its products through careful
consideration of design, production, delivery,
process and product life cycle. The PT-AX100E
reflects the following ecological considerations.
• Lead-free solder is used to mount compo-
nents on the printed circuit boards.
• No halogenated flame retardants are used in
the cabinet.
• No polystyrene foam is used in the packing
materials.
• Lead-free glass is used for the lens.
• The packing case and operating manual are
made from recycled paper.
• Lamp power switching further reduces
power consumption.
• Standby power consumption is a mere 0.08
watts in the standby mode.
Please contact Panasonic or your dealer for a demonstration.
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric
Industrial Co., Ltd. VGA and XGA are trademarks of International Business Machines Corporation.
All other trademarks are the property of their respective trademark owners. Projection images simulated.
3 m (9´10˝)
ABS/PC
395 x 112 x 300 mm
(15-17/32˝ x 4-13/32x˝ x 11-25/32˝)
4.9 kg (10.8 lbs.)
Temperature: 0°–40°C (32°–104°F)
Humidity: 20%–80% (no condensation)
3 V DC (UM-3 (AA) battery x 2)
Approx. 7 m (23´) when operated
from directly in front of the signal
receptor
48 x 138 x 28 mm
(1-7/8˝ x 7-27/32˝ x 1-3/32˝)
125 g (4.4 oz.) (including batteries)
Power cord, Wireless remote control
unit, Batteries for remote control
(UM-3 x 2)
Replacement lamp unit
Ceiling mount bracket
Serial adaptor (DIN 8-pin/D-sub 9-pin)
PT-AX100E1-06SEP32K Printed in Japan.