Panasonic PT-DS12K Broschüre - Seite 4

Blättern Sie online oder laden Sie pdf Broschüre für Projektor Panasonic PT-DS12K herunter. Panasonic PT-DS12K 8 Seiten. Pt-dz13k series 3-chip dlp projectors

Panasonic PT-DS12K Broschüre
Reliability and
Stability
Panasonic's Original Dual Lamp
System
This system eliminates the interruption if a
lamp should fail (in dual-lamp operation
mode). The Lamp Relay mode also
operates the lamps alternately to enable
24/7 projection.
Eco Filter that Needs No Mainte-
nance for up to 12,000 Hours
The Eco Filter has an electrostatic Micro Cut
Filter that collects minute dust particles with
an ion effect. It combines with the
dust-resistant cabinet to enable long-term
use even under harsh conditions. Its
maintenance cycle of
up to 12,000 hours
reduces hassle, and
the environmental
design lets you wash
the filter with water
and reuse it.*
8
Low TCO and an Environmentally
Friendly Design
The PT-DZ13K Series projectors lower the
total cost of ownership because they have a
lamp replacement cycle of up to 2,500
hours.*
Their environmentally friendly
9
design also includes a low power consump-
tion of 1,000 W.
Easy Lamp Replacement
For easier maintenance, you can replace
the lamp from the rear. This makes it easy
to replace a lamp unit while the projector is
still in the mounting bracket or dual stacked.
Optional Smoke Cut Filter
ET-SFD320
The projector can be equipped with an
optional, extra-strong air filter to prevent the
entry of smoke, such as those used for
special effects at events and stage
performances.
System Integration
Flexible Installation
The wide adjustment range of the powered
horizontal/vertical lens shift function can be
easily adjusted with the remote control. The
unit can also be
rotated 360° vertically,
to accommodate
various installation
conditions. The
lens-centered design
*
7
contributes to easy
installation.
Lens Memory
The settings of projection size, lens shift
position, and focus/zoom can be stored in
memory and recalled for instant switching.
1000 inches
A Wide Selection of Lenses (optional)
Choose from a wide lineup of lenses for
your system, including short-throw, long-
throw zoom and fixed-throw lenses for rear
projection use. The additional lenses make
it easy to adapt your projector to the
installation site. The lenses attach and
detach with one-touch ease.
New Geometric Adjustment
Specially Shaped Screens
( PT-DZ13K/DS12K )
This function adjusts the image for projection
onto spherical, cylindrical and other specially
shaped screens. You can make the
adjustment easily using only the remote
control, with no external equipment needed.
Flexible calibration lets you project onto curved surfaces.
Smoke Cut Filter
ET-SFD320
You can keep the aspect on when correcting curves. To
make effective use of the screen area, you can also turn the
aspect-keeping function off.
Flexibility
360°
*
10
750 inches
for
*
11
Each corner can be independently
adjusted, and up to three sets of
adjusted data can be stored.
Keep
Keep
aspect on.
aspect off.
Crestron RoomView
and AMX
Device Discovery
The LAN terminal allows a computer
connected to the network to use Crestron
RoomView
application software to manage
and control system devices. Besides, The
AMX Device Discovery technology is built in
the PT-DZ13K Series projector.
Optional Upgrade Kit Featuring
Geometry Manager Pro
( PT-DZ13K/DS12K )
The new Geometry Manager Pro software
included in the optional upgrade kit supports
Color Matching, Edge Blending, uniformity
correction, and other useful functions for
multiprojector setups (max. 32 units). It also
allows creative masking using four lines or
bitmap data. And its flexible and complex
geometric adjustment capability suits a wide
variety of screen shapes.
Create masking data...
Line masking
Use it to overlap the
projection image...
Bitmap masking: Detaild
masking is also possible. Up
to three of masking data can
be stored.
And the image is
projected only in the
designated areas.
Multi-Unit Brightness Control
This function automatically corrects the
brightness fluctuations that occur over time
in the individual projectors of a multi-screen
system. Up to eight projectors can be
controlled by connecting to each other via a
hub, and this can be increased to a
maximum of 2,048 projectors by using
"Multi Projector Monitoring & Control
Software Ver. 2.8."
Conventional Projector
Multi-Unit Brightness
Control "ON"
At the time when the
At the time when the
projectors are installed (A)
projectors are installed (A')
Projector 1
Projector 2
Projector 1
After a certain time has
After a certain time has
passed (B)
passed (B')
Brightness
Brightness
Preset
Image from the
Brightness
brightness
projector 1
fluctuations
Images from the
Image from the
occur.
projector 1 and 2
projector 2
Time
(A)
(B)
(A´)
Projector 2
Time
(B´)