Panasonic PT-L702SDE Betriebsanleitung - Seite 31
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Projektor Panasonic PT-L702SDE herunter. Panasonic PT-L702SDE 34 Seiten. Sd memory card compatible lcd projector for commercial use
Seite drucken
Troubleshooting
NO FILE
CARD FULL
WRITE
PROTECTED
NON STANDARD
CARD
COPY GUARD
SIGNAL
LAST FILE
NO CARD
ERROR
Before asking for service
Check the following before asking for service.
Symptom
Computer cannot
recognise the SD
memory card
Writing is not
possible
Video signals
from the computer
cannot be pro-
jected.
There are no image files that can be displayed by the
projector on the SD memory card.
There is no free space on the SD memory card.
The write-protect switch on the SD memory card is set
to the LOCK position. Capturing, deleting and moving
files is not possible.
A non-standard card has been inserted.
The video signal being input includes a copy guard
signal. Capturing is not possible with such signals.
The directory contains only one file, and this file cannot
be deleted.
No SD memory card has been inserted.
An error has occurred with some operation. If the error
cannot be reset by pressing the input select (INPUT,
RGB, VIDEO) button, turn off the projector power by
following the procedure given under "Turning off the
power" in the PT-L702E or PT-L701E Operating In-
structions, and then turn the power back on again.
Check the following
B Has the PC card adapter been securely inserted
into the PC card slot of the computer?
B Has the SD memory card been securely inserted into
the SD memory card slot of the PC card adapter?
B Has the driver been installed correctly?
B Are insufficient computer system resources avail-
able? (Refer to the Windows online help.)
B Is the write-protect switch on the SD memory card
set to the LOCK position?
B If using a notebook computer, has the external
output been configured properly? (It may be pos-
sible to toggle the external output settings by press-
ing the Fn key and the F3 key at the same time. This
depends on the type of computer you are using.
Check the computer documentation for details.)
31