Panasonic PT-L780NTE Betriebsanleitung - Seite 24
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Projektor Panasonic PT-L780NTE herunter. Panasonic PT-L780NTE 36 Seiten. Wired and wireless/portable projector
Auch für Panasonic PT-L780NTE: Betriebsanleitung (36 seiten), Broschüre & Specs (4 seiten)
Seite drucken
WEB PASSWORD
(PT-L780NTE only)
You can set the password for
controlling the projector with a
personal computer by means of a
wireless or wired network using an
optional wireless or projector LAN
card. Use the F or G buttons to
change the characters, and use the
I or H buttons to change the
character position. When finished,
press the ENTER button. The
projector comes from the factory
without any password.
If password setting is complete, the
password will not be displayed on
the WEB PASSWORD screen.
When you forget it, set it again from
the beginning.
CONTROL KEY
To make the buttons on the
projector not function, set the
CONTROL KEY to "OFF".
To use the buttons on the projector,
set to ON. (page 14)
FUNC 1
This assigns a function to the FUNC1
button of the remote control unit .
MUTE
B Functions in the same way as the
MUTE function. (page 43)
KEYSTONE
B Functions in the same way as
when "KEYSTONE" is selected
from the POSITION menu
screen. (page 40)
SET ID
SET ID is used to set projector IDs to
control two or more projectors either
simultaneously or separately.
46-E
NGLISH
All manuals and user guides at all-guides.com
"ALL": The projectors can be
simultaneously controlled from
any remote control unit
regardless of their ID settings.
"1":
The projector can be controlled
from the remote control unit
with its projector ID set to "1".
"2":
The projector can be controlled
from the remote control unit
with its projector ID set to "2".
"3":
The projector can be controlled
from the remote control unit
with its projector ID set to "3".
S E T I D
NOTE:
SET ID is set to "ALL " by default.
Hence ID number need not be set
when only one projector is used.
If the projectors are given ID
numbers, their remote control units
must be assigned the same ID
numbers, respectively.
If the SET ID s of two or more
projectors are set to "ALL", the user
will not be able to control them
separately.
The projector can be turned ON/OFF
from the remote control unit only if the
projector ID is set in the remote
control unit. For the details of
projector ID setting, see page 21.
AUTO POWER OFF
If any signal is not input into the
projector during the time that you set
up, the projector will return to standby
mode. The auto power off time can
be set to, from 15 minutes to 60
minutes, by 5 minutes. If you don't
use this feature, set it to "OFF".
A L L
[
1
[
2
[
3
This feature will not function u
the following situation.
1) When the NETWORK or SD
CARD is selected (PT-L780
only).
2) When using the freeze func
3) When writing the data in the
memory card (PT-L780NTE
only).
NETWORK SET
You need make adjustment on
with a personal computer by m
an optional wireless card or pr
ROM for details.
NETWORK
STATUS
LAN1
WEP
KEY1
調整：［←］［→］
SELECT:[^][@]
ENTER:[ENTER]
ESC:[MENU]
SD CARD SET
The following settings are use
SD memory card. Refer to the
SD CARD
AUTOPLAY
OFF
REPEAT
1
INTERVAL
5 sec
SELECT:[^][@]
ENTER:[ENTER]
ADJUST:[{][}]
ESC:[MENU]
ON