Panasonic PT-L780U Betriebsanleitung - Seite 20

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Projektor Panasonic PT-L780U herunter. Panasonic PT-L780U 42 Seiten. Panasonic operating instructions lcd projector pt-l780ntu pt-l780u
Auch für Panasonic PT-L780U: Betriebsanleitung (42 seiten)

Seite drucken

WHITE BALANCE R/G/B

(RGB only)

This is used to adjust the white

areas of the picture if they appear

colorised. Press the I button to

make the selected color lighter.

Press the H button to make the

selected color stronger.

Projecting sRGB-

compatible pictures

sRGB is an international color

reproduction standard (IEC61966-2-

1) established by the International

Electrotechnical Commission (IEC).

If you would like the colors in sRGB-

compatible pictures to be

reproduced more faithfully, make

the following settings.

# Press the F F or G G button to

select "PICTURE MODE", and

then use the I I or H H button to

select "NATURAL".

$ Press the F F or G G button to

select "COLOR TEMP.", and

then use the I I or H H button to

select "STANDARD".

% Select the STANDARD from the

menu screen by pressing the

F F or G G buttons and then press

the ENTER button.

& Select the LAMP POWER item

in the OPTION menu by

pressing the F F or G G buttons

and set to "HIGH" by pressing

the I I or H H buttons. (pages 44

and 45)

NOTE:

B sRGB is only enabled when RGB

signals are being input .

Adjusting the position

When the input signal is RGB, first

press the AUTO SETUP button to

initiate automatic positioning.

If the optimum setting is not

obtained when AUTO SETUP is

carried out, adjust by the following

procedure.

Select the item pressing the F or G

buttons on the remote control unit or

the projector.

Press the I or H buttons, to adjust

the alternative items. For the

numerically adjustable items, press

the ENTER button to display an

individual screen, and press the I

or H buttons to adjust the setting.

Some items can be adjusted

pressing the F or G buttons.

When an RGB/DVI signal is being

input

"POSITION", "DOT CLOCK" and

"CLOCK PHASE" are not displayed

when a DVI signal is being input.

When an S-VIDEO/VIDEO signal is

being input

When a YP

signal is being input.

When the NETWORK/SD CARD is

selected (PT-L780NTU only)