DiamondBoxx L3 Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Tragbares Stereosystem DiamondBoxx L3 herunter. DiamondBoxx L3 12 Seiten. Bluetooth boombox
Auch für DiamondBoxx L3: Benutzerhandbuch (16 seiten)
Seite drucken
The Rear Panel
This is where you plug in the included charger to recharge
your DiamondBoxx.
USE ONLY THE INCLUDED CHARGER
OR MAJOR DAMAGE CAN OCCUR.
The output jack can be
used to connect to DiamondBoxx subwoofers or other
nd
DiamondBoxx products. The input jack is a 2
input that is
mixed with the front panel AUX jack, they can be used
simultaneously.
These connections can also be used to link multiple DiamondBoxxes together,
or to add a DiamondBoxx Subwoofer. By plugging a 3.5mm Stereo cable into
the OUT jack of one DiamondBoxx and into the IN jack of another
DiamondBoxx you will have double the sound. The first DiamondBoxx will
control the volume for both DiamondBoxxes. You can continue to daisy-chain
them like this up to concert sound levels!
Tip:Turn power off to all DiamondBoxxes involved during this process. Then
turn on the "Main" DiamondBoxx before turning on the next one.
Bluetooth Tip:
If using Bluetooth, turn the "Main" DiamondBoxx on first,
connect your Bluetooth device, then continue to turn on any other
DiamondBoxxes. The cable required is a standard
STEREO
3.5mm cable
(sometimes called TRS) available at guitar or musical instrument store, or from
our website or an electronics supply store, or Amazon.