Panasonic DVD-CV37 Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic DVD-CV37 herunter. Panasonic DVD-CV37 24 Seiten. Dvd/cd player
Auch für Panasonic DVD-CV37: Betriebsanleitung (24 seiten), Betriebsanleitung (24 seiten), Betriebsanleitung (32 seiten), Betriebsanleitung (29 seiten), Kurzanleitung (2 seiten)
Seite drucken
Getting
started
Mel
RQT6519
j
Y
|
Connection to a television
\
This page explains how to connect the unit to a television and set it up so you hear the audio through the television's speakers. To get the full benefit from
the powerful multi-channel audio found on DVDs, you should connect an amplifier and speakers (= page 18).
Before connection
Disconnect the AC power supply cord.
e Rafer to the television's operating instructions.
To household AC outlet
(AC 120 V, 60 Hz)
Television
AUDIO
VIDEO
3
red white yellow
AC power
supply cord
(included)
Audio/video cable
(included)
i
|
The illustration shows
6 eee
eer)
1
|
|
|
DVD-CP67
To enjoy progressive video
Connect to the component video (480p) input terminals on a television
compatible with this unit's copy guard system. (Video will not be
displayed correctly if connected to an incompatible television.)
In QUICK SETUP, set "Progressive Out" to "Enable" (= page 7).
For your reference
All televisions manufactured by Panasonic and that have 480p input
connectors
are compatible.
Consult
the manufacturer
if you have
another brand of television.
1 e ent
ee
A u AAA
y
Connect your unit directly to your television.
Do not connect the unit through your video cassette recorder when j
setting up your home entertainment system, because the picture may i
not be played correctly due to the copy guard.
=-
a
d
S VIDEO OUT terminal
The S-video terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signats. (Actual results depend on the television.)
Television
S VIDEO
S video cable
(not included)
When making this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference
signals (Pe/Pn) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colors.
eThe description of the component video input terminals depends
on the television or monitor (e.g. Y/Pa/Pa, Y/B-Y/A-Y, ¥/Ca/Cr).
Connect to terminals of the same color.
e After making this connection, change the black level for a better
picture (= page 16, Video—Black Level Control).
*[DVO-CP67)
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S VIDEO OUT
terminal.
Television
COMPONENT
Video cable
VIDEO IN
(not included)
When making this connection, ensure you connect the audio cables
to the corresponding audio input terminals on the television.
Conserving power
This unit consumes a small amount of power, even when it is turned off (approx. 2.5 W). To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet,
po
a
E Batteries
EJ The remote control
e Insert so the poles (+ and —) match those in the remote control.
6
| e Do not use rechargeable type batteries.
Do not:
emix old and new batteries.
euse different types at the same time.
eheat or expose to flame.
etake apart or short circuit,
eattempt to recharge alkaline or manganese batteries.
®use batteries if the covering has been peeted off.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
Remove if the remote contro} is not going to be used for a long period of
time. Store in a cool, dark place.
E Use
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet)
directly in front of the unit.