Panasonic HT40 - SC Home Theater System Betriebsanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic HT40 - SC Home Theater System herunter. Panasonic HT40 - SC Home Theater System 24 Seiten. Home theater audio system
Seite drucken
4
Step
Change the settings to suit your equipment to the environment in which you are using it. Before making any changes, read the
descriptions of the settings, note the factory settings and ranges, and refer to the equipment's instructions.
DISTANCE
Enter the distance
of the front, center
a n d s u r r o u n d
speakers from the
seating position.
DIG INPUT
(digital
input)
Adjusting
speaker
output
level
8
Settings
Change the distance so that the
sound from all the speakers (except
for the subwoofer) reaches you at
the same time.
You can select distances between 3
and 30 feet.
The factory settings are:
10 ft (feet)
LR (front):
10 ft (feet)
C (center):
5 ft (feet)
S (surround):
Change the digital input settings
for TV or DVR/DVD-P to coaxial if
your equipment doesn't have an
optical output terminal. (One of
the terminals will remain unused,
whatever the setting.)
The factory settings are:
TV:
OPT1
DVR (DVR/DVD-P):
OPT2
C (center), SR (surround right) and SL (surround left) can be adjusted
between -10 dB and +10 dB, with 0 dB being the level of the front
speakers. Adjust center and surround output to the same apparent
level of the front speakers.
For SUBW (subwoofer), you can select "SUBW - - -" so there is no
output, "SUBW MIN" for minimum output, a level between 1 and 19,
or "SUBW MAX" for maximum output. Adjust subwoofer output so it is
balanced with the front speakers.
Subwoofer output is easily influenced by the source. You can also
change its level while playing something for better effect (➡ page 16).
Enter the setup mode.
MENU
SETUP
RETURN
Press and hold.
Select "DISTANCE".
TUNE
DISTANCE
Select "DIG INPUT".
TUNE
DIG INPUT
Output the signal.
-LEVEL
TEST
Press and hold.
TEST
L
L C R SR SL SUBW