Panasonic NS55 - SC Micro System Betriebsanleitung - Seite 15
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic NS55 - SC Micro System herunter. Panasonic NS55 - SC Micro System 24 Seiten. Cd stereo system
Seite drucken
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, refer to the "Customer Services Directory" on page 18.
Common problems
No sound.
Sounds unfi xed, reversed or
come from one speaker only.
Humming heard during
play.
"ERROR" is displayed.
"- -:- -" appears on the
display.
"F76" is displayed.
Listening to the radio
Noise is heard.
The stereo indicator fl ickers
or doesn't light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during
AM broadcast.
XM Satellite Radio advisory messages
"ANTENNA" is fl ashing.
"UPDATING" is fl ashing.
"NO SIGNL" is fl ashing.
"LOADING" is fl ashing.
"OFF AIR" is fl ashing.
"XM – – –" is displayed.
"XM RADIO" is displayed.
"– – –" is displayed.
You can receive only
promotional XM channels.
When there is a television set nearby
The picture on the TV
disappears or stripes appear
on the screen.
Playing discs
The display is wrong or play
won't start.
"MECH ERR"
The remote control
Remote control doesn't
work.
Turn the volume up.
The speaker cords may not be connected properly. Turn the unit off, check and correct the connections
and turn the unit on ( ➡ page 5).
Check the speaker connections ( ➡ page 5).
An AC power supply cord or fl uorescent light is near the cables. Keep other appliances and leads away
from this unit's cables.
Incorrect operation performed. Read the instructions and try again.
You plugged the AC power supply cord in for the fi rst time or there was a power failure recently.
Set the time ( ➡ page 13).
Check and correct the speaker cord connections ( ➡ page 5).
If this does not fi x the problem, there is a power supply problem. Consult the dealer.
Use an outdoor antenna ( ➡ page 4).
Turn the TV off or separate it from the unit.
Separate the antenna from other cables and cords.
The XM Passport Mini-Tuner and Home Dock is not properly connected.
Check the connection and make sure the antenna cable not damaged ( ➡ page 5).
The XM Passport Mini-Tuner and Home Dock is being updated with the latest encryption code.
Wait a few seconds for the update to complete.
You may have selected an XM channel that has been blocked, or is no longer available with your
subscription package.
If you want to inquire about receiving the channel, call XM's Listener Care at 1-800-XMRADIO
(1-800-967-2346).
The XM signal is too weak.
Reorient the XM Passport Mini-Tuner and Home Dock for better reception.
The XM Passport Mini-Tuner and Home Dock is receiving and decoding the broadcast information.
Wait a few seconds for loading to complete.
The selected XM channel is not currently broadcasting.
Select a different channel.
The selected XM channel is not available. Select a different channel.
It takes a short time for the XM radio to power up after turning on the main unit, during which time "XM
RADIO" is displayed (only when the selected source is XM).
Wait a few seconds for this process to complete.
Supplemental text information, such as the song title or artist's name is not available for that particular broadcast.
You can change the type of XM channel information that is displayed by pressing [DISPLAY].
Your XM Passport Mini-Tuner and Home Dock has not been activated, or your subscription has expired.
To activate your XM Passport Mini-Tuner and Home Dock, or to renew your subscription, visit XM on the
Web at www.xmradio.com or call XM's Listener Care at 1-800-XMRADIO (1-800-967-2346). You should
have your Radio ID ready.
The location and direction of the antenna are incorrect. If you are using an indoor antenna, change to an
outdoor antenna ( ➡ page 4).
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
The disc may be upside down ( ➡ page 7).
Wipe the disc.
Replace the disc if it is scratched, warped, or non-standard.
Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an
hour for it to clear and try again.
Check that the passage of the disc tray is cleared. Remove if anything is placed under the disc tray. Turn
off and then turn back on the unit.
Check that the batteries are inserted correctly ( ➡ page 5).
Replace the batteries if they are worn.
15