Panasonic RQTV0080-1P Betriebsanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic RQTV0080-1P herunter. Panasonic RQTV0080-1P 24 Seiten. Panasonic cd stereo system operating instructions model no. sc-pm23 rqtv0080-1p

Seite drucken

Cassette tape

Basic play
Basic play
1
Press [0] and insert the cassette.
Forward side
2
Close the lid by hand.
Press [TAPE 3] to start play.
3
To play the other side of the cassette, turn the cassette over.
To
Action
Press [ 7 ].
stop tape playback
Press [TAPE 3] when the unit is OFF with
start one-touch play
the cassette loaded.
fast-forward and
Press [ /REW/4] or [ /FF/¢] in the
rewind
stop mode.
Note
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Endless tapes can get caught up in the deck's moving parts if used
incorrectly.
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [ /REW/4] or
/FF/
[
Play resumes from the track found.
Note
TPS may not function properly:
• with short silent parts
• when noise occurs between tunes
• if silent parts are found within tunes
Recording
Recording
Use normal position tapes.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
Preparation
Wind the leader tape so that recording can begin
immediately.
Disc lid
Insert inside the guides
¢
] during play.
Top of unit
CD OPEN/CLOSE 0
Recording the radio
Recording the radio
1
Insert the cassette to be recorded.
2
Tune to the required station (refer to page 10).
8
3
Press [¶ REC/
] to start recording.
Recording discs
Recording discs
Insert the cassette to be recorded.
1
Push [CD OPEN/CLOSE 0] to insert the disc and
2
close the lid.
8
Press [CD 3/
] and then [7, –DEMO].
3
Press [PLAY MODE] to select your desired mode
4
(refer to page 7).
8
Press [¶ REC/
] to start recording.
5
Recording programmed tracks
Recording programmed tracks
1
Insert the cassette to be recorded.
2
Program the tracks you want (refer to page 8).
8
3
Press [¶ REC/
] to start recording.
Other basic operations
Other basic operations
To
Action
erase a recorded
1) Insert the cassette to be recorded.
2) Press [TAPE 3] and then [7, –DEMO].
sound
3) Press [¶ REC/
Press [ 7 ].
stop recording
stop recording
1) Press [¶ REC/
temporarily
2) Press again to resume recording.
record on the other
Turn the cassette over and press
side of the tape
[¶ REC/
Erasure prevention
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Side A
Tab for side A
Tab for side B
8
].
8
].
8
].
To re-record
Normal tape
Adhesive tape
9