Panasonic SA-AK770 Betriebsanleitung - Seite 16
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic SA-AK770 herunter. Panasonic SA-AK770 24 Seiten. Panasonic cd stereo system operating instructions
Seite drucken
Using other equipment
Note:
All peripheral components and cables are sold separately.
Avoid interfering with other Panasonic
Avoid interfering with other Panasonic
equipment
equipment
Other Panasonic audio or video equipment may start functioning
when you operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote
control operating mode to "REMOTE 2".
The main unit and remote control must be set to the same
mode.
1
Press [MUSIC P.] (main unit: [FM/AM/MUSIC P.]) to select
"MUSIC PORT".
2
Press and hold [FM/AM/MUSIC P.] on the main unit. Then
press [2] on the remote control until "REMOTE 2" is
displayed.
3
Press and hold [OK] on the remote control followed by
numeric button [2].
To change the mode back to "REMOTE 1", repeat the steps above
by replacing [2] with [1].
Connecting to a portable audio equipment
Connecting to a portable audio equipment
This feature enables you to enjoy music from a portable audio
equipment.
Playing or recording from a portable audio
equipment
Switch off the equaliser function (if there is any) of the portable
audio equipment before you plug into the MUSIC PORT jack.
Otherwise, sound from the speaker may be distorted.
1
Plug the audio cord into the MUSIC PORT jack.
2
Press [MUSIC P.] (main unit: [FM/AM/MUSIC P.]) to select
"MUSIC PORT".
For listening : Proceed to step 3.
For recording : Press [¶ REC, TAPE] on the main unit to start
3
Play the portable audio equipment. (See the portable audio
equipment's instruction manual.)
16
RQT8043
Portable audio equipment
(not included)
Audio cord
(not included)
recording.
Connecting the Universal Dock for iPod
Connecting the Universal Dock for iPod
You can charge and play your iPod by connecting a Universal Dock
for iPod (SH-PD10, sold separately) to this unit.
Connecting and charging the iPod
1
Connect the Universal Dock for iPod into the OPTION port.
iPod
(not included)
SH-PD10
(not included)
2
Insert the appropriate adapter and place your iPod into the
Universal Dock. (See the SH-PD10's instruction manual.)
Note:
• Hold the dock when disconnecting the iPod.
• iPod will be recharged regardless of whether this unit is on or off.
Playing the iPod
1
Connect the iPod as described above.
2
Press [6, OPTION] to start play.
To
Action
Pause
Press [6, OPTION] or [7, CLEAR].
Press [6, OPTION] to resume play.
Skip tracks
Press [4,
Search through
Press and hold [4,
tracks
[¢,
/ FF].
Display iPod
Press [DISPLAY].
menu screen
Use as iPod
Press [5/∞, ALBUM].
menu cursor
Confi rm iPod
Press [OK].
menu selection
Note:
Refer to the SH-PD10's instruction manual for the compatible iPod
models.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
Rear panel of
this main unit
/ REW] or [¢,
/ FF].
/ REW] or