Panasonic SA-AK78 Betriebsanleitung - Seite 39

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic SA-AK78 herunter. Panasonic SA-AK78 44 Seiten. Panasonic sc-ak78 cd stereo system operating instructions
Auch für Panasonic SA-AK78: Betriebsanleitung (45 seiten), Betriebsanleitung (44 seiten)

Seite drucken

Using the timer

Using the play/record timer

PLAY

REC

CLOCK

TIMER

If you set the timer incorrectly

Repeat the procedure from step 1.

To check settings

While the unit is on and the "

[CLOCK/TIMER] so "

PLAY" (or

Two seconds after "

PLAY" (or

played in the following order.

• For play timer

• For record timer

Play start time

Play end time

Play source

Playback volume

To enjoy the desired source after the timer setting is completed

The volume level and music source are stored in the timer memory and

the timer will start in these preset conditions. However the Disc number

and reverse mode do not get stored in the timer memory.

1. After step 7, turn on the unit and start playing the desired source.

2. Reset the Disc number and reverse mode if you have changed any of

them, confirm that a Disc or cassette is inserted, then press [POW-

ER] to put the unit on standby.

Turning the timer ON/OFF

One of the timers is on when the [

When the unit is on (or off and NORMAL mode) you can confirm which

is on by checking the indicators on the display.

When the unit is off and in ECO mode, press [CLOCK/TIMER].

The display will then show which timer is on and the settings that have

been made (see above).

To change the timer, press [

PLAY/

Each time the button is pressed the setting changes as follows.

PLAY

REC

(off)

Note

• If the power is on, the timer will not function. The system must be in

the standby mode.

• If you switch the power to the standby mode while the play/record tim-

er is functioning, the OFF time setting will not be activated.

• If "AUX1/2" or "6CH DISCRETE INPUT" is selected as the source,

when the timer comes ON, the system will turn ON and will engage

"AUX1/2" or "6CH DISCRETE INPUT" as the source. If you want to

playback or record from a connected component, set the component's

timer to the same time. (See the instruction manual that came with the

component.)

• The play timer cannot be used in combination with the record timer.

PLAY" (or

REC) indicator is on, press

REC) appears on the display.

REC) appears, the settings are dis-

Recording start time

Recording end time

Recording source

PLAY/

REC] button is alight.

REC].

Using the sleep timer

This timer turns power to your system OFF at the set time (Max. 2

hours, settable at 30 minute intervals). It lets you fall asleep listening

to music.

by remote control only

The figure shows how to set the system to standby mode after 30

minutes.

AUTO OFF

CH SELECT

While enjoying the desired source:

Press [SLEEP] to select the desired time.

Every time you press the button;

120

OFF

The system is turned off after the set time has elapsed.

To cancel the sleep timer:

Press [SLEEP] to select "OFF".

To confirm the remaining time:

(only while power is ON)

Press [SLEEP].

To change the time remaining during operation:

Press [SLEEP] to show the remaining time then press [SLEEP] to se-

lect the desired time.

Note

• The sleep timer turns OFF automatically the moment you attempt to

edit-record a CD using CD Manager function.

• The sleep timer can be used in combination with the play/record

timer.

The sleep timer always has priority.

Be sure not to overlap timer settings.

SLEEP

MUTING

SLEEP

DISC

AV EFFECT

3D AI

RQT5289