Panasonic SA-AKX75 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stereo System Panasonic SA-AKX75 herunter. Panasonic SA-AKX75 20 Seiten. Cd stereo system

Remote control code

When other Panasonic equipment responds to the

remote control of this system, change the remote control

code for this system.

Preparation

Press [RADIO, EXT-IN] (main unit: [RADIO/EXT-IN]) to

select "MUSIC PORT" or "AUX".

To set the code to "REMOTE 2"

Press and hold [RADIO/EXT-IN] on the main unit

and [2] on the remote control until "REMOTE 2"

is shown.

Press and hold [OK] and [2] for a minimum of

4 seconds.

To set the code to "REMOTE 1"

Press and hold [RADIO/EXT-IN] on the main unit

and [1] on the remote control until "REMOTE 1"

is shown.

Press and hold [OK] and [1] for a minimum of

4 seconds.

Memory reset (initialization)

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

Disconnect the AC power supply cord.

While you press and hold [1] on the main unit,

connect the AC power supply cord again.

Continue to press and hold the button

(approximately 10 seconds) until "– – – – – – – –" is

shown.

Release [1].

All the settings are set back to the factory preset.

It is necessary to set the memory items again.

Maintenance

To clean this system, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean

this system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.