Panasonic SA-AKX910 Betriebsanleitung - Seite 15
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic SA-AKX910 herunter. Panasonic SA-AKX910 40 Seiten.
Seite drucken
█ Changing the repeat setting
1
Press [PLAY MENU].
2
Press [Y, U] to select the setting and then press
[OK].
Using the main unit
In the stop mode, turn [MULTI CONTROL] to select the
setting and then press [4/9].
RANDOM REPEAT
RND
ALL TITLE REPEAT
RANDOM MIX REPEAT
RND
Clock and timers
Setting the clock
This is a 24-hour clock.
1
Press [SETUP] to select "CLOCK".
2
Press [Y, U] to set the time and then press [OK].
To check the time
Press [SETUP] to select "CLOCK" and then press [OK].
In standby mode, press [DISPLAY].
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select "OFF".
To check the remaining time
Press [SLEEP].
Note:
•
The remaining time is shown for a few seconds every
minute. "SLEEP 1" is always shown when only 1 minute
remains.
•
The sleep timer always comes first. Be sure not to set an
overlap of timers.
Repeat random playback.
Repeat all tracks.
Repeat random playback.
Sample sound is added to the
intervals of all tracks.
Play timer and record timer
(Except for Bluetooth
and AUX source)
®
You can set the timer to come on at a certain time to:
• Wake you up (play timer).
• Record from the radio (record timer).
Play timer and record timer cannot be used together.
Preparation
Set the clock.
1
Press [SETUP] repeatedly to select "TIMER ADJ".
2
Press [Y, U] to select "#PLAY" or "#REC" and
then press [OK].
3
Press [Y, U] to set the start time and then press
[OK].
4
Do step 3 again to set the end time.
5
For play timer, press [Y, U] to select the source
you want to play and then press [OK].
6
For record timer, press [Y, U] to select "MEMORY"
or "USB B" to keep the recording and then press
[OK].
To start the timer
1
Prepare the source.
Play timer
Prepare the source you want to listen
to (disc, USB, internal memory or
radio) and set the volume.
Record timer
Connect the USB device to
USB recording) and tune in to the
radio station.
2
Press [SETUP] repeatedly to select "TIMER SET".
3
Press [Y, U] to select the setting and then press
[OK].
PLAY ON
Start the play timer.
PLAY OFF
Cancel the play timer.
REC ON
Start the record timer.
REC OFF
Cancel the record timer.
"#" is shown.
The system must be switched off for the timer to
operate.
To check the setting
1
Press [SETUP] repeatedly to select "TIMER ADJ".
2
Press [Y, U] to select "#PLAY" or "#REC" and
then press [OK].
In standby mode, press [DISPLAY] two times.
Note:
•
The play timer starts at a low volume and increases
gradually to the preset level.
•
The record timer starts 30 seconds before the set time with
the volume muted.
•
The timer comes on at the set time every day if the timer is
on.
•
If you switch off the system and then switch on again while a
timer is in operation, the timer will not stop at the end time.
(for
USB B
15
15