DIAQUIP QFS-1200 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Säge DIAQUIP QFS-1200 herunter. DIAQUIP QFS-1200 12 Seiten. Electric floor saw

3. MAINTENANCE AND TRANSPORTATION

3.1)

Maintenance

Switch the engine off according to section 1.2 and pull out the power cord

It is recommended to spraying and cleaning the machine with water after the deployment of

labor.

Grease periodically the bearings of the cutting shaft, the blade lowering crank mechanism and

all other bearings as well as the bearings of the wheels.

Check the state of the electrical prolongation wire.

Never use a faulty cable!

Faulty cables are highly dangerous, you maybe get killed!

Danger

3.2)

Tensioning of the V-belts

The V-belts being used for driving the cutting shaft have to be strained tight (V-belt should allow

to be pressed down approx. 1 cm). Too much tension means bearing load of the engine and

cutting shaft and should be avoided.

Changes of the drive-belts:

1. Switch the engine off and remove the power cord

2. Release the tow screws from V-Belt protection

3. Relax the drive-belts by the clamp bolt

4. Push the motor backward

5. Assemble the new drive-belts

6. Stretch the drive-belts with the clamp bolt,

(V-belt should allow to be pressed down approx. 1 cm)

7. Assemble the V-belt protection cover with the 2 screws

WWW.DIAQUIP.CO.UK

/09