Panasonic SCAK12 - CD STEREO SYSTEM Betriebsanleitung - Seite 20
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic SCAK12 - CD STEREO SYSTEM herunter. Panasonic SCAK12 - CD STEREO SYSTEM 32 Seiten. Cd stereo system
Auch für Panasonic SCAK12 - CD STEREO SYSTEM: Betriebsanleitung (33 seiten), Betriebsanleitung (32 seiten), Betriebsanleitung (32 seiten)
Seite drucken
A
B
To protect tapes against further recording
Side A
Tab for side "B"
To re-record
Normal position tape
C
20
RQT5621
Tab for side "A"
SC-AK44
only
Hi-position tape
Detection hole
1
3
2
4
Listening to tapes
To fast-forward or rewind the tape
A
Press [g/(] or [)/f] in the stop mode.
SC-AK44
Tape direction
To rewind
" 3"
[g/(]
"4"
[)/f]
SC-AK33
SC-AK22
SC-AK12
SC-AK33
To rewind
[g/(]
To find the beginning of a program
A
(TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.
Press [g/(] or [)/f] during play.
Note
•
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
Before recording (Deck 2 only)
Types of tapes which can be recorded correctly
SC-AK44
Use normal and high position tapes.
Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.
The unit automatically identifies the type of tape.
SC-AK22
SC-AK33
SC-AK12
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Erasure prevention
B
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown, being careful not to
cover the high position discrimination hole.
How volume, sound quality/field affect recording
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field.
To erase a recorded sound
C
1. Press [TAPE, DECK 1/2].
2. Insert the recorded tape into deck 2.
SC-AK44
3.
only
Press [REV MODE] to select reverse mode.
4. Press [a REC/STOP].
Notes
•
You cannot open deck 1 while recording.
•
You cannot fast-forward or rewind one deck while recording with
the other.
To fast-forward
[)/f]
[g/(]
To fast-forward
[)/f]