Panasonic SCPM41 - MINI HES W/CD PLAYER Betriebsanleitung - Seite 12
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic SCPM41 - MINI HES W/CD PLAYER herunter. Panasonic SCPM41 - MINI HES W/CD PLAYER 20 Seiten. Cd stereo system model no. sc-pm41
Auch für Panasonic SCPM41 - MINI HES W/CD PLAYER: Betriebsanleitung (20 seiten)
Seite drucken
Cassette tape – Play and record
Basic play
Basic play
Press [OPEN 0] on top of the unit.
1
Insert a cassette.
2
Forward side
3
Close the lid by hand.
For the United Kingdom and Continental Europe,
continue with steps 4 to 5.
For Australia and N.Z., proceed to step 6.
4
Press [PLAY MODE] to select the reverse mode.
Each time you press the button:
One side plays.
Both sides play (forward = reverse).
Both sides are played repeatedly until you press
[CLEAR 7].
TAPE `] to start play.
5
Press
[
Each time you press the button:
3
: The forward side (front) plays.
2
: The reverse side plays.
TAPE 3] to start play.
6
Press
[
To play on other side of the cassette, turn the cassette
over.
To
stop tape playback
start one touch play
fast-forward and
rewind
12
RQT8043
Insert inside the
guides
=
=
Action
Press [CLEAR 7].
Press [TAPE `] when the system is OFF
with the cassette loaded.
Press [4/REW/4 ] or [3/FF/¢] in the
stop mode.
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [4/REW/ 4] or [3/FF/¢] during play.
Play resumes from the track found.
TPS may not function properly with:
• Short silent parts
• Noise occurs between tunes
• Silent parts found within tunes
Before recording
Before recording
Preparation
Wind up the leader tape so that recording can begin
immediately.
• Use normal position tape.
• High position and metal position tape can be used, but this unit will
not be able to record or erase them correctly.
Preparatory steps
Preparatory steps
For the United Kingdom and Continental Europe.
1
Insert the cassette to be recorded on.
Forward side
The tape direction is automatically set to "
To record on the reverse side
Press [TAPE `] twice, then press [CLEAR
2
Press [PLAY MODE] to select the reverse mode.
Each time you press the button:
=
One side only records.
Both sides are recorded (forward = reverse).
"
" automatically changes to "
[¶REC/8].
For Australia and N.Z..
Insert the cassette to be recorded on.
To record on the reverse side
Turn the cassette over.
Top of the unit
Cassette lid
Insert inside the
guides
3
".
7
].
=
" when you press