Panasonic SCPM71SD - MINI HES W/CD PLAYER Betriebsanleitung - Seite 26
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Panasonic SCPM71SD - MINI HES W/CD PLAYER herunter. Panasonic SCPM71SD - MINI HES W/CD PLAYER 44 Seiten. Sistema estéreo de sd
Auch für Panasonic SCPM71SD - MINI HES W/CD PLAYER: Betriebsanleitung (44 seiten), (Englisch) Betriebsanleitung (12 seiten)
Seite drucken
Recording from cassette tape/the radio to SD
Note
You can use SD cards with capacities between 8 MB
and 1 GB on this unit. (⇒ page 6)
26
Preparation
1
Insert the SD card. (⇒ page 8)
• Securely close the lid of the SD card slot. You cannot record if the lid is open.
2
Press [REC MODE] to select the recording mode.
Recording from cassette tape
(Normal recording only)
1
Insert the cassette tape.
2
Select "TAPE" as the source.
3
Select the recording method.
Every time you press the button:
MANUAL: Normal recording
TIME MARK: Track marks are inserted automatically every five minutes.
4
While pressing [*/h REC], press
+
[SD, -HI-SPEED CD q SD] to start
recording.
• When recording from cassette tape, recording automatically stops when the end of the
side of the tape being recorded from is reached. To record from the other side, turn the
tape over.
• Do not open the lid while recording. This may cause recording to stop or the data may
not be correctly recorded onto the SD card.
If you accidentally open the cover when recording from the radio, recording stops.
Recording from the radio
(Normal recording only)
1
Tune to the station.
(⇒ page 22)
2
Select the recording method.
Every time you press the button:
MANUAL: Normal recording
TIME MARK: Track marks are inserted automatically every five minutes.
3
While pressing [*/h REC], press
+
[SD, -HI-SPEED CD q SD] to start
recording.
To stop
Press [g STOP].
To pause
While pressing [*/h REC], press [SD, -HI-SPEED CD q SD].
The SD pauses and the cassette tape or radio continues playing. ("REC" flashes on the
display.)
Press again to restart recording.
A track mark is added. (⇒ below)
To display the remaining time on the SD
Press [DISPLAY, –DIMMER] several times.
n Adding track marks on the SD
You can add track marks where the track changes on the cassette tape or radio. These
marks separate tracks in a recording. They can be added automatically or manually during
recording.
During recording
"TR MARKING" is shown on the display and a track mark is added.
(⇒ page 19)