Biomorph ProPlus electric bi-level desk Kurzanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Kurzanleitung für Inneneinrichtung Biomorph ProPlus electric bi-level desk herunter. Biomorph ProPlus electric bi-level desk 3 Seiten.
Seite drucken
biomorph
adjustable PACS furniture
ProPlus Table
Cable Management
Questions? call 888 302 3375
controller box.
(connections face front or rear
depending on model)
cable chain
opposite heights to ensure that cables will travel w/o stress)
Ground Support Equipment (US) Ltd. DBA biomorph, 11 Broadway, New York, NY 10004 888 302 3375 fax: 212 809 4324 [email protected]
Run extra cable length through the CableCab.
Place plugstrip inside for connections.
®
Position with removable panel facing user.
use supplied screws to attach CableCab
using pilot holes, centered on grommet hole
cable tracks
use supplied cable guides
(important: extend desktops to full
CableCab
desk frame
switch for
front / rear
CableCab
surfaces
IMPORTANT: OPERATION & TROUBLESHOOTING
1. Adjust up or down by pushing the up or down arrows.
2. When first assembled or when unplugged, always lower
the table to bottom, release then hold down for 10 seconds
to level surfaces and reset controllers.
3. To set height memory: choose height, press 'S' then '1' or '2'.
To return to preset: press the chosen # (1or 2)
4. Push button w/circular arrow to change from front to rear.
TROUBLESHOOTING: Check all connections and reset per #2.
mounts for monitor arms
(if purchased)
attach tops to frame with
supplied screws using
pilot holes
controller box
for surfaces
#4
#3
#2
cable chain
use pilot holes
to mount
cable chain
#1(
)
leg cables
#1(
)
switch