dibea F20B MAX Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Staubsauger dibea F20B MAX herunter. dibea F20B MAX 7 Seiten. Cordless vacuum cleaner

Seite drucken

Precautions and product maintenance

During using

※

Please do not approach to the heater such as radiator and butt

Before using

※

To prevent damage caused by collision, please remove large and sharp objects. Don't use it

for any inflammable objects or liquids, such as gasoline, cigarette or alcohol

Daily storage

For long-time storage, please place the machine in cool and dry place, and avoid direct

sunlight or humidity

Machine cleaning

How to dump dust and clean the dust cup

Push the button under the machine body forward and the dust cup assembly will pop up

(refer to the previous installation instruction), making it easy to put the cup into a dustbin

or a garbage bag for dust removal.

As shown in the figure, press the bottom lock of dust cup to open the cup cover and

dump the dust.

Replace or clean the filter

Please separate the dust cup from the machine body (refer to the previous installation

instruction)

As shown in the figure, take out the top filter element of dust cup, and clean it with soft

hair brush or put the cup in warm water for washing. Before next using, please make sure

that the dust cup and filter element are dry (the filer element can be washed when the

suction power is weakened).

Notice: Before using, please ensure all filters are installed

in correct position

Common faults and product

parameters

※Common faults and solutions

S/N

Phenomenon

Possible cause

Fail to work

The battery is out of power

1、

Fail to suck dust or weak

The dust cup is filled with dust

suction power

2、

The battery power is low

1、

The dust cup is filled with dust

Dust leakage

2、

The battery power is low

Fail to suck dust after

The dust cup is filled with dust

connecting with floor brush

Common indication faults of fault indicating lamp

If the three LED-lights on the battery pack turn red and

flash, it may have the following faults

※

After the switch button is long pressed for more than 6s, the machine will be shut down

automatically and the three LED-lights turn red and flash. Press the switch button again to start the

machine

※

If the floor brush is blocked by foreign matters, the machine will not be shut down automatically,

but the three LED-lights will turn red and flash; shut down the machine, remove the foreign matters in

the floor bush, and press the switch button again to start the machine

※

If the internal temperature of machine is too high, the machine will start the overheat protection

function and be shut down automatically and the three LED-lights turn red and flash. Restart the

machine after its body is cool and it will recover to normal.

※

The machine will be short-circuited and shut down automatically after sucking liquid, and the

three LED-lights will turn red and flash quickly. Please don't start/shut down the machine repeatedly.

Remove the battery for recharging and restart the machine after troubleshooting.

When the host motor is blocked by foreign matters, the machine will work intermittently in the

four "respiration" form and be shut down automatically. Please restart after removing the

foreign matters.

※Product parameters

Rated power

400W

Battery configuration

Li-ion 2000mAh 29.6V

Charging time

2~3H

Noise level

75dB

Outline dimension

1172×256×217

Weight (net/gross weight)

2.5kg/3.8kg

Capacity of dust cup

500ml

Solution

Check whether the battery has

power or needs replacement

1、

Clean the dust cup

2、

Connect the power adapter

for charging

1、

Clean the dust cup and install

it correctly

2、

Connect the power adapter

for charging

Remove the dust and clean the

dust cup