Easypix Aquapix W1400 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Action-Kameras Easypix Aquapix W1400 herunter. Easypix Aquapix W1400 3 Seiten.

Seite drucken

5.2 Inserting a memory card (not included)

This camera has no built-in internal memory. The memory can be gained with a MicroSD memory

card (not included).

Follow the instructions below to insert the optional MicroSD memory card into the camera.

1. Turn off the camera first.

2. Open the battery door (please make sure the battery door was unlocked before open).

3. Insert the MicroSD card into the camera.

Notes:

There is only one right direction to insert the MicroSD memory card into the slot. Do not

force the card into the memory card-slot, which may damage both the camera and the

MicroSD memory card.

The MicroSD memory card must be formatted before taking photographs. See the following

section for more information.

5.3 Formatting the memory or microSD card

1. Press the Menu button (

) in PHOTO or VIDEO mode.

2. Select the setup mode by pressing the Right button.

3. Select the format icon by pressing the W (

) button and press the Shutter button to

confirm.

4. Press the Shutter button to format the SD memory card.

5.4 Setting the resolution

The camera can be set to different resolutions.

1. Press the Menu button (

) in PHOTO mode, select the resolutions icon by the W (

and press the Shutter to confirm.

Available resolutions:

VGA (640 x 480), 3M (2048 x 1536),

5M(2592x1944); 8M(3264x2448); 14M=4320x3240; 20M=5184X3888.

2. Six different resolutions will be displayed. Select the desired resolution by using the Up or

Down button and press the Shutter button to confirm the selection.

5.5 Taking photos

1. Turn on the camera.

2. Depending on the distance to the object being photographed, use macro switch to adjust

the distance.

Set the macro switch to macro mode (

) if you wish to take a close-up photograph.

(11cm–18cm);

Set the macro switch to normal mode (

) if you wish to take a video or a photo of

surroundings or people (0.5m – infinity).

3. If you are not sure if there is enough lighting, turn on the automatic flash (

the Flash button. (If the battery power is too low, the flash won't be activated).

4. Use the LCD screen to aim at the object you wish to take photographs of.

5. Press the Shutter button and wait until the LCD display turns on again.

Cautions:

1) Taking pictures for fast-moving object is not recommended.

2) Image may be distorted when taking pictures in a moving vehicle.

5.6 Zooming in and out

The camera can zoom in up to 4 times.

Zoom in or out by pressing the Up or Down button, a number will appear on the display, 4.x is the

maximum zoom ratio.

5.7 Taking a self-portrait shot using the front monitor

If you want to take a photo of yourself, you can simply use the front LCD screen. Follow the steps

below:

1. Press the Monitor switching button to switch to the front monitor.

2. Use the front monitor as a viewfinder to aim at yourself.

3. Press the Shutter button to take a photo of yourself.

5.8 Self-timer setting

You can also use the self-timer function when you take a photograph of yourself or when you take

a photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.

1. Set the camera to photo mode.

2. Press the Menu button (

). The menu will appear.

3. Press the W (

) button to select Self Timer and confirm by pressing the Shutter button.

4. Press the W (

) button to select the "On" option

5. Press the Shutter button to confirm. The self-timer function is now ready for use.

6. Aim at the object you wish to take photos of.

7. Press the Shutter button to take a photograph.

8. The photo will be taken after the timer reaches the delay time of 10 seconds. The camera will

beep during the delay time.

5.9 Recording video clips

1. Press the Mode button to select the video clip mode (

2. For setting the resolution, press the Menu (

the Shutter button to confirm. Two resolutions will be displayed.

VGA (640 x 480), QVGA (320 x 240).

Press the Shutter button to start recording videos, press the right button to pause and press

the Shutter button again to stop recording. The video clip will now be saved as an AVI file in

the MicroSD memory card.

After reaching a max. video recording time of 29 minutes the camera will

automatically stop. It can only be restarted manually.

5.10 Playing back photos

1. Press the Playback (

) button to enter the Playback mode.

2. The last picture or video clip taken will be displayed. Press the W (

mode. Press the Left /Right /Up/Down button to select the desired picture, and press the

Shutter button to view.

3. In full screen display, press the T (

4. To shift the image in zoom-in mode, press the Shutter button and then use the

Mode/Menu/Left/Right buttons.

5. Long press the Menu (

) button in Playback mode until the menu is displayed. Select

Slide Show and set up the desired slide show way. Press the Shutter button to confirm. The

pictures saved in the MicroSD card will be displayed in sequence automatically. To stop slide

show, press the Shutter button.

6. Long press the Menu (

) button in Playback mode until the menu is displayed. Select

Photo Effect and press the Shutter button. Select the desired effect by pressing the up/down

button and press the shutter button to confirm. The image will be saved as a separate image.

5.11 Protecting photos/videos

To lock up the photos/videos and make them under protection from being deleted by the camera,

follow the instructions below.

Follow the instructions below to protect photographs/videos.

1. Press the Playback (

) button to get into Photo playback mode.

) key

2. Press the Left or Right button to select the photograph/video clip to be protected.

3. Long press the Menu (

) button in Playback mode until the menu is displayed. Select

Protect and press the Shutter button.

4. Select "Single" or "Protect all" and press the Shutter button to confirm to set a single file or all

the files under protection.

5. To unprotect the protected file(s), please select "Unprotect all".

5.12 Resizing photos

A captured image can be resized and saved as a separate image.

Follow the instructions below to resize photographs.

1. Press the Playback (

) button to get into Photo playback mode.

2. Press the Left or Right button to select the photograph/video clip to be resized.

3. Long press the Menu (

) button in Playback mode until the menu is displayed. Select

Resize and press the Shutter button.

4. Select the new size and press the Shutter button to confirm. The image will be saved as a

) by pressing

separate image.

5.13 Playing back video clips

1. Press the Playback (

) button to enter the playback mode.

2. Press the Left or Right button to select the video.

3. Press the Up button to play the video.

4. When the video is being playing, press the Up button to pause or resume.

5. Press the Right button for fast forward or press the Left button for fast rewind.

6. Press the Mode button to stop and exit.

5.14 Deleting photos and video clips

You can delete a single photograph / video clip, or delete all the photographs / video clips in the

memory card.

Follow the instructions below to delete photographs/videos.

1. Press the Playback (

) button to enter the playback mode.

2. Press the Left or Right button to select the photograph/video clip to be deleted.

3. Press the Menu/Delete button（

4. Press the Shutter button to confirm.

5. Press the Menu button to exit.

Note:

Select "All" and press the Shutter button to confirm, all the pictures and videos will

be deleted. Photos that are protected from accidental erasure cannot be deleted. To delete

photos, set the protect setting for the set photos to unprotect mode (Section 5.11), you can

then delete the photos by following the above 1- 5 procedures.

6. Connecting to a PC

The unit can be connected to the computer as mass storage device and transfer photo/video files

for storage.

) button and select Resolution, then press

) to enter the thumbnail

) button to zoom in the photo.

）and select "Single" or "All" .

7. Specifications

Sensor

14.0 Mega pixels CMOS sensor

20 Mega pixels: (5184x3888)

14 Mega pixels: (4320x3240)

8.0 Mega pixels: (3264x2448)

Image resolution

5.0 Mega pixels: (2592x1944)

3.0 Mega pixels: (2048x1536)

VGA: (640x480)

Lens

F/2.8 f = 8.5mm

Focus range

0.5m. ~ Infinity

Macro mode

11cm – 18cm

Digital zoom

Flash strobe

Built-in ( Auto / force / off )

M-Shutter

Yes

LCD display

2.7+1.8" TFT color display

White balance

Auto / Daylight / Cloudy / Fluorescent / Tungsten

Video Frame Rate

30fps@VGA / 30fps@QVGA

External Storage Media

MicroSD card, not included (supports up to 32GB)

File format

Picture: JPEG, Video: AVI

Self timer

10 seconds

PC interface

USB 2.0

Power source

2 x AAA alkaline batteries

8. System requirements

Operating system

Win XP, Vista, Win7, Win8, Win10, Mac OSX 10.6.8 or above

CPU

Pentium III or above

RAM

At least 64MB

Interface

USB port

4x speed CD ROM or above

9. Troubleshooting

Problem

Cause

Low battery power.

Cannot turn on the camera

Batteries placed at wrong

polarities.

Photos can not be saved

The memory card hasn't

when taking pictures.

been formatted properly.

Cannot find removable disk

after connecting the camera

Connection failure.

to the computer.

Flash does not work.

Battery power is too low.

Batteries used up very fast. Old, used up battery

1. The camera is not held

steadily

Blurry photos

2. The lens of camera is

dirty.

Before using your camera in the water please verify that all lids and locks are tightly closed and

sealed.

After using the camera in water please let it dry.

The camera should not be exposed to high temperatures and humidity differences to avoid

condensation behind the lens.

Open the battery compartment only when the camera is dry.

HOW TO OPEN THE BATTERY COMPARTMENT OF THE CAMERA

Push the release lever toward the rear of the camera.

At the same time place your fingernail under the cover in the middle of the camera and slide the

compartment to the outside.

The battery compartment cover can now be hinged upward.

Solution

Replace or install the batteries

correctly.

Format the memory card in setup

mode of the camera. Please refer

to section 5.3.

Make sure all cable connections

are secured and restart the

computer if necessary.

Replace with new 2x AAA alkaline

batteries

Replace with new 2 x AAA alkaline

batteries

1. Hold the camera steadily until it

beeps when taking a photo.

2. Clean the lens with soft and dry

cloth.