Bion-Tech BTM-3000 Betriebshandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Water Filtration Systems Bion-Tech BTM-3000 herunter. Bion-Tech BTM-3000 20 Seiten. Super oxide water ionizer batch system
Seite drucken● Determine of setting time
This device is designed to produce drinking alkaline water and regular acidic water by
20 minute operation, and adding some salt to the water, to produce super oxide
water and strong alkaline water by 30 minute operation. However, determine the
setting time by testing the pH value with pH reagent because the input water pH value
is various according to the region's s tap water quality.
● Precautions of handling separator
●
The membrane has a lot of invisible holes, which will become narrower and will
get blocked as it is being used.
●
If it bets blocked completely, the water can not be ionized anymore as the
electricity current can not flow through it.
●
The membrane and the gasket are to be exchanged every 800~1200 hours operation.
● In case of not using the device for a long period
●
If you do not use the device for a long period of time, dry up the membrane well
keep the unit in a dry place.
●
Especially in summer, if you do not use the device for over three days, it is required
to keep the Electrolytic cell completely dry.
●
When you use it again do it in order as the manual says.
How to take care of the device
● How to clean the electrodes
The coating Titanium of acidic tub is sanitary and semi-permanent.
The exchange of electrode is not required but wash it with water if necessary.
Coating Titanium electrode of alkaline tub is also semi-permanent.
But you need to remove white matters, minerals like calcium, stuck on it.
●
Do not leave ionized waters in the Electrolytic cell. It may cause some troubles.
BTM-3000 (영).indd 16
16
2016-08-25 오후 5:11:52