EasyPro EPL20 Anweisungen für den Betrieb - Seite 3
Blättern Sie online oder laden Sie pdf Anweisungen für den Betrieb für Unterwasserbeleuchtung EasyPro EPL20 herunter. EasyPro EPL20 4 Seiten. 20 watt, 12 volt, submersible underwater lights
Seite druckenService and Maintenance of Submersible Lights
Disconnect the transformer from the power supply before service.
1.
2.
All parts of the lighting system should be checked on a regular basis to make sure the system is
functioning properly.
3.
To replace a bulb, bring the light to the surface. Unscrew the black plastic cover and remove.
Remove the clear glass waffle lens. Be sure not to loose the o-ring under the lens. Gently pull
out on the outer portion of the light bulb reflector from the light housing. Gently pull the bulb
straight out of the ceramic socket.
When installing the new light, do not touch the bulb with your fingers. Insert the new bulb
4.
into the ceramic socket by grasping the bulb and pushing the two prongs into the socket.
Make sure to hold on to the new bulb by the edges.
5.
Insert the ceramic socket and the new bulb back into the light housing.
6.
Install the clear waffle lens and screw the black plastic cover back on, do not over tighten.
7.
When installing the colored lens, remove the lens from the package and push the three tabs
into the three pockets on the black plastic cover.
8.
To remove or change colored lens, simply pull straight up gently on the colored lens.
Replacement Parts for Underwater Lights - EPL20 & RL20
Replacement light w/lens ..................EPL20
Rock Shell without light .....................RL20R
Color LED bulb ..................................LEDB
Colored lens (4 pack) .........................EPL20C
Clear lens ...........................................EPL20L
20 watt bulb (2007 and newer) ..........SLKB20
35 watt bulb .......................................SLKB35
50 watt bulb .......................................SLKB50
100 watt transformer .........................EPT100
3