EasyPro LED9WWK Anweisungen für den Betrieb

Blättern Sie online oder laden Sie pdf Anweisungen für den Betrieb für Unterwasserbeleuchtung EasyPro LED9WWK herunter. EasyPro LED9WWK 2 Seiten. 9 watt stainless steel submersible light kit with 45 watt transformer

Seite drucken

9 Watt Stainless Steel Submersible Light Kit with 45 Watt Transformer

Underwater LED Light Kit

Instructions for Operation • Safety • Warranty

Thank you for purchasing an EasyPro submersible LED pond light kit. With these warm,

white LED lights you can make your fountain glow, illuminate your pond from within, high-

light your waterfall and extend the enjoyment of your water feature in the evening hours.

The LED9WW fixtures can be used in the landscape out of the water or as a submersible

underwater light with other warm white LED or halogen fixtures.

LED9WW Specs:

• Housing type: 316 stainless steel

• Lumens per watt: 137

• Color Temperature: 2800-3000 K

• Power usage at 12V AC: 9 watts

• Power cable: 30 ft, bare leads

• Integrated driver

• 22° beam angle

• 5 year warranty

EPT45 Transformer Specifications:

• Input: 120Vac, 60Hz

• Output: 12Vac, Max 45 watts

• Built-in photo-eye with four settings: Auto, 4, 6, or 8 hour

• Integrated output screw terminals

• 3' SJTW 12 AWG cord

Safety and Electrical Connections:

1 Always disconnect the electrical supply before handling, maintaining, repairing or install-

ing any pond equipment.

2 Light(s) must be attached to a 12 volt UL listed magnetic transformer.

3 Never hook the lights directly to a 120 volt or higher outlet.

4 Connect the transformer only to a 120 volt receptacle that is protected by a Ground

Fault Circuit Interrupter (GFCI).

5 Do not use this product in bathrooms or swimming pools.

6 All electrical work must be performed by a qualified technician. Always follow the Na-

tional Electrical Code (NEC) or the Canadian Electrical Code as well as all local, state

and provincial codes. Code questions should be directed to your local electrical inspec-

tor. Failure to follow electrical codes and OSHA safety standards may result in personal

injury or equipment damage. Failure to follow manufacturer's installation instructions

may result in electrical shock, fire hazard, personal injury or death, damaged equipment,

provide unsatisfactory performance and may void manufacturer's warranty.

LED9WWK