HTC 800 Classic Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch für Bodenmaschine HTC 800 Classic herunter. HTC 800 Classic 36 Seiten.

HTC 800 Classic

Note!

If the machine is stored in a cold (minus degrees) location, it must be placed in

a warm (plus degrees) location for at least two hours before use.

Note!

The appropriated dust extractor must be used when dry grinding. Contact HTC

for model recommendation.

Note!

The dust extractor's suction hose must be connected to the appropriate socket

on the machine. Adjust the dust extractor to match the grinder's capacity.

Note!

Do not use the emergency stop switch to stop the machine, except in

emergencies.

Note!

As long as the emergency stop switch is pressed in, the machine cannot be

started. Reset by turning the switch 45° clockwise so that it pops out again. The

machine can then be restarted.

Note!

After removing glue and wet grinding, always lift up the grinding heads so that

they do not stick to the floor and damage machine components and the floor

when restarting.

Note!

When wet grinding, the water tank must be filled with water. Only use cold

water with no chemical additives.

1.0

Safety