HTC 800 HDX Benutzerhandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Bodenmaschine HTC 800 HDX herunter. HTC 800 HDX 48 Seiten.

HTC 650 HDX

4.5. Fitting and replacing grinding tools

Warning!

Disconnect the electrical supply, when changing tools or repairing

the machine.

Warning!

The tool becomes very hot during use. Tip the machine back and

allow it to stand for a short while. Use protective gloves when

removing the tools.

As the machine is equipped with the patented EZchange tool

system, fitting and replacing grinding tools is quick and easy. The

tool system consists of wings on which diamond grinding tools are

fitted without the need for screws.

Figure 4-9 Fitting grinding tools

1.0

Slide the grinding tool diagonally, from above, down into

the appropriate guide slot on the tool holder, see Figure

4-9 on page 21. Then push the tool fully into the guide

slot.

Lock the grinding tool into the tool holder by giving

it a few light taps with a rubber hammer - see Figure

4-10 on page 22.

Usage