DICE MediaBridge MB-1000 Installationshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge DICE MediaBridge MB-1000 herunter. DICE MediaBridge MB-1000 2 Seiten. Integration solution for bmw/mini cooper vehicles
Auch für DICE MediaBridge MB-1000: Installationshandbuch (2 seiten), Installationshandbuch (2 seiten), Installationshandbuch & Benutzerhandbuch (17 seiten)

Seite drucken

DICE MediaBridge MB-1000 Installationshandbuch

USB iPod operation

• Use DISC 1-6 to enter specific modes (SONG, PLAYLIST, ARTIST,

ALBUM, PODCAST and AUDIO BOOK) when iPod is locked.

• Within each mode, use the track buttons to browse the items

available

• Use Random feature or button on radio to shuffle songs.

Note: if the iPod is unlocked for direct control, radio control will be

limited to Songs, Playlists, and Albums. Text display will also be

limited to show only current song information. It will not show the

name of Playlist / Artist / Album.

Firmware update

STEP 1:

Disconnect the Media Bridge module from the vehicle.

STEP 2:

Download and install necessary software from www.diceelectronics.com

STEP 3:

Open software to follow instructions for updating Media Bridge unit.

STEP 4:

Plug in Media Bridge via mini USB cable and update.

STEP 5:

Disconnect and reinstall the unit into the vehicle.

Mini USB port for software update

Disclaimer and warranty

Important disclaimer, please read!

Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed

under specific license agreement with respective owners and is licensed only, not sold. No warranty, explicit or

implied, is stated. Neither DICE Electronics, LLC., nor any of its agents, distributors, dealers or vendors shall be

liable for damages.

IN NO EVENT SHALL DICE ELECTRONICS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT

FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM

THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION.

Warranty and Support

Products carry a 90 day limited warranty that protects you from defects in material and workmanship of products

sold by DICE Electronics, or its authorized agents, distributors and dealers. The warranty period begins the day a

product is purchased by the end user. Products found to be defective during the warranty period will either be

repaired or replaced by DICE Electronics at no charge unless warranty is void. Unauthorized attempt of repair or

alteration of the product in any way immediately voids this warranty. Warranty does not extend to cosmetics or

finish. A DICE product specialist must determine that defect is present in the product and issue an RMA. Be sure

that all wiring is connected as described in the user manual and all related equipment is functioning properly.

DICE Electronics disclaims any liability for other incurred damages resulting from product defects. Any expenses

in the removal and reinstallation of products are not covered by this warranty.

If experience any problems or need help, please contact your local dealer or call 888-342-3999, or visit our

support site at http://www.diceelectronics.com/support.

AUX operation

USB iPod mode

• An auxiliary audio device can be connected to the Media Bridge

change songs

unit through the 1/8" mini-jack

DISC1

TRACK

• Audio device must be controlled manually.

change playlist

DISC2

TRACK

• Audio level can be adjusted while in auxiliary mode by selecting

DISC 1-4 and using track buttons to increase or decrease levels.

change artist

DISC3

TRACK

change album

DISC4

TRACK

change podcast

DISC5

TRACK

change audio book

DISC6

TRACK

1/8" mini stereo jack (not included)

Problem

No audio from iPod source.

Cannot select the interface.

Radio/ steering wheel controls do not

operate iPod.

Why does category read

"PRESELCTD"?

What size of USB flash drive

should I use?

Installation notes:

Installed by:

Installed date:

Other notes:

AUX mode

change volume setting

DISC1

TRACK

change bass setting

DISC2

TRACK

change mid EQ setting

DISC3

TRACK

change treble EQ setting

DISC4

TRACK

Solution

Reset the iPod. Verify proper connection to iPod/interface. Check

for compatibility. Older iPod models don't support USB audio. Hold

switch must be on for 5th generation iPod video.

Verify unit is trying to be accessed as the CD-changer source.

With ignition off, disconnect vehicle harness from module for a

minute, verify connections and reconnect.

Reset iPod and make sure the most recent iPod firmware is

installed. Check vehicle user manual on how steering wheel

controls work, long presses may toggle alternate function.

Playback of content selected on the iPod before connected to

the interface continues until new content is selected.

Large capacities are supported, however up to 4GB is

recommended for optimal user experience.

Illustration:

Sirius Connect

operation (with SIRIUS tuner connected)

SIRIUS display screen:

Channel number * station name * program title

Saving stations:

• Single line radios: Tune to desired station. Press RND button and select which DISC to save to (1-6).

Deselect RND.

• Navigation radios: Tune to desired station. Press and hold DISC to save as preset.

Sirius mode

None-Navigation radios

RND

DISC 1-6

to store

store current station to PRESET 1-6.

then

station

When done, press RND again to deselect

DISC 1-6

recall PRESET 1-6 stations

Navigation radios

to store

station

DISC 1-6

store current station to PRESET 1-6

• If a Sirius Connect compatible tuner is not detected, then either a "No Tuner" vehicle message is

displayed, or the SIRIUS option will not be selectable.

• Go to Channel 000 to view the Sirius Tuner ID for activation. The 12 digit ID is displayed as "SIRIUS ID"

followed by "123456-789000".

Troubleshooting

Problem

Solution

Check all connections. See if iPod charges while connected to

iPod does not charge.

computer or wall charger. You may need to reset the iPod.

Music is distorted or sound level

Make sure all EQ and BASS boost options are turned off on your iPod.

is too low with iPod connected.

You can set audio base level in DISC 3, see page 6.

Please make sure that the USB connection is not loose. Make sure

that an iPod case is not preventing the dock connector from being fully

Why is the interface not

seated. Disconnect and reconnect the device. If iPod is not responding

controlling the iPod/USB drive?

please try resetting it. USB device must also be FAT16/32 format and

contain supported MP3, WMA or AAC content.

Check for proper connection to the mini DIN 8 receptacle. Make sure

Sirius tuner can't be selected.

that the connector pins are not bent. Make sure to select SIRIUS in

Audio Source Selection (refer to page 6).

Why does the radio display show

USB iPod: the end of a playlist or selection has been reached. Select

"EMPTY/STOP" and no music

a new playlist from DISC2.

plays?

USB Memory: There are no supported audio files on the flash drive.

Common Control

change channel

TRACK