BioNano Genomics Saphyr System Handbuch zur Systemsicherheit - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch zur Systemsicherheit für Laborausrüstung BioNano Genomics Saphyr System herunter. BioNano Genomics Saphyr System 9 Seiten.
Seite druckenLaser Safety Warnings
The Saphyr system has a laser system classification of a Class 1 product, which uses embedded Class 3B and
one Class 4 laser. The Saphyr System is certified to the IEC 60825-1:2014 standards.
The nominal wavelength outputs include the following optical power:
•
500 mW (532 nm)
•
140 mW (637 nm, 2 each)
•
400 mW (488 nm)
•
90 mW (785 nm)
A Class 1 laser product is safe under all conditions of normal use.
A Class 4 laser product is hazardous if the eye is directly exposed to the laser. However, the diffuse reflections
are not harmful. Protective eye wear is required when a person is viewing a class 3B laser beam. All Class 4
lasers must be equipped with a key switch and a safety interlock.
Preventing Radiation Exposure
•
Do not open the front panel of the instrument because you could come into contact with a Class 4 laser.
•
If you operate the instrument with any panels removed, you risk radiation exposure from the direct or
reflected laser light.
•
If you use controls or make adjustments that are not specified in The Saphyr Safety Guide, you can be
exposed to hazardous radiation.
Safety Labeling
Figure 1: Class 4 Laser Warning
30253 Rev A, Saphyr System Safety Guide for Saphyr P/N 60325
Page 6 of 9