Epcom PROAUDIO SFB240 Betriebshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Verstärken Epcom PROAUDIO SFB240 herunter. Epcom PROAUDIO SFB240 15 Seiten. Public address system

Seite drucken

5. OPERATION ILLUSTRATION

1.Connect the speakers:

①When the 100V and 70V selector switch to

70V position, as shown below:

OUTPUT

70V/

COM COM COM

100V

SPK-

Maximum output voltage: 70V

Note:

1. Before connecting the speakers, please make sure that the equipment is powered off. In the

case of power on, may have the risk of electric shock.

2. Please make sure there are no applied load to the speaker cables.

3. During the installation of speakers, please make sure that the sum of the rated input power

of the speakers to be connected is less than rated power of equipment.

2.Connect external devices

①

Please make sure this amplifier and other equipment to be connected are turn off.

②

Please use the correct cable to connect with external equipment.

3.Connect the power cord and turn on:

①

Please make sure the power switch is off when c o nnect t h e e q uipment.

②

Turn the volume knob to the counterclockwise.

③

Connect the power cord with AC IN interface, turn on the power switch.

④

Turn on the other equipment firstly (CD player, etc), then turn on this amplifier.

Note:

1. Please check carefully to make sure the correct connection before turning on power.

2. Please turn off this amplifier firstly, and then turn off other equipment.

②When the 100V and 70V selector switch to

100V

70V

SPK+

100V position, as shown below:

OUTPUT

70V/

COM COM COM

100V

SPK-

Maximum output voltage: 100V

100V

70V

SPK+