Dictator DICTAMAT 50 WS-MFL Technisches Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Technisches Handbuch für Türöffnungssystem Dictator DICTAMAT 50 WS-MFL herunter. Dictator DICTAMAT 50 WS-MFL 17 Seiten.

Seite drucken

Technical Manual

DICTAMAT 50 WS-MFL

1) Determining the

Mounting Positions

Spring rope pulley

Bracket with

supporting rope

tensioner and

clamp piece for

WS 6 wire rope

Page D50WS-MFLHB.04

C) Installation of the DICTAMAT 50 WS-MFL

The spring rope pulley of the DICTAMAT 50 WS-MFL is mounted in the

CLOSED position of the sliding door.

Radial damper LD with attachment for wire rope

Wire rope WS

and

supporting rope

Only the wire rope and the supporting rope hold the radial damper LD

50 WS with freewheel carrier. It is not fixed to the door!

IMPORTANT: The wire rope and the supporting rope have to position

the freewheel carrier in such a way that with one side it can push with

the buffer the door leaf and on the other side, when the door is open,

the complete surface of the magnet adheres to the counter

plate (see ill. 7).

Door

The attachment on the radial damper for guiding the wire rope can be

turned according to the required damping direction (see point C/2d).

IMPORTANT: The bracket with the tensioning device for the supporting

rope and the clamp piece for the wire rope as well as the bracket with

the wire rope tensioner and the holder for the supporting rope have to

be mounted so that the wire rope and the supporting rope run exactly

in a straight line (see ill. 8).

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 201906

in freewheel carrier with counter plate

Bracket with magnet, wire

rope tensioner and holder

for the supporting rope

Ill. 6

Ill. 7

Ill. 8