Alpha Outback Energy CableUPS XM3V-HP Schnellstart-Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für UPS Alpha Outback Energy CableUPS XM3V-HP herunter. Alpha Outback Energy CableUPS XM3V-HP 7 Seiten.

Seite drucken

8.0 Final Verification

Local Web Server Access
The ethernet port of the Alpha DOCSIS Transponder can be used as a local connection point, allowing the user to
connect to the transponder web page.
To access the web page, proceed as outlined below
NOTE:
A Static IP address (192.168.100.2) may need to be set on your network interface card to connect to the
transponder.
1. Using a standard (CAT5) ethernet cable, connect transponder to the laptop or computer network interface port.
2. Launch a web browser.
3. Enter the transponder's default IP address (192.168.100.1) into the web browser's address field.
4. The transponder's web server home page will appear.
For the Alpha DOCSIS Transponder, this may take up to 45 seconds when the transponder is initially powered up
with no RF connection.
Remote Web Server Access
To remotely access the Alpha DOCSIS Transponder web server utilizing a web browser:
1. Open a web browser on a computer connected to the same network as the XM3V.
2. Enter the Alpha DOCSIS Transponder's designated IP address (e.g., 192.168.1.124) into the web browser
address field.
3. The Alpha DOCSIS Transponder 's web server home page will appear.
Worldwide Corporate Offices
Headquarter Germany
Hansastrasse 8
D-91126 Schwabach
Tel: +49 9122 79889 0
Alpha and Outback Energy GmbH reserves the right to make changes to the products and information contained in this document without notice. Copyright © 2020 Alpha and Outback Energy GmbH. All
Rights reserved.
For more information please visit
France and Benelux
Eastern Europe
Middle East
Spain
www.alpha-outback-energy.com
Africa
017-891-B1-001 (Preliminary)