Alpha Professional Tools ECOGRDGR Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Werkzeuge Alpha Professional Tools ECOGRDGR herunter. Alpha Professional Tools ECOGRDGR 16 Seiten. Dust collection cover
Seite druckenINStallING thE CONNECtOR
If a different Connector is needed, exchange the connector per the following
instructions.
1. loosen the Screws.
2. take the front of the Connector assembly off.
Ecoguard type G
3. loosen the flat head Screws using the hex Wrench.
4. take the back of the Connector assembly off.
5. Replace with other Connector.
6. Place in the other Connector assembly.
flat head Screw
hex-Wrench
7. tighten flat head Screws with hex Wrench.
(DO NOt forget to insert taper Washers)
Connector assembly
(front)
Connector assembly
(back)
Screw
flat head Screw
hex-Wrench
(fig.2)
taper Washer
(fig.3)
7