EPH Controls R27 Betriebsanleitung

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Hauptplatine EPH Controls R27 herunter. EPH Controls R27 2 Seiten. 2 zone programmer

Seite drucken

R27 - 2 Zone Programmer

Contents

Factory default settings

Factory program settings

Resetting the programmer

Setting the date and time

ON/OFF period selection

Adjusting the program settings

Copy function

Reviewing the program settings

Boost function

10. Advance function

11. Holiday mode

12. Backlight mode selection

13. Keypad lock and unlock

14. Frost protection

15. Master reset

1. Factory default settings

Program:

5/2D

Backlight:

Keypad:

Unlocked

Frost Protection:

2. Factory program settings

P1 ON

P1 OFF

Mon-Fri

Sat-Sun

7:30

10:00

All 7 days

P1 ON

P1 OFF

Everyday

P1 ON

P1 OFF

3. Resetting the programmer

It is necessary to press the RESET button prior to initial programming.

This button is located behind the cover on the front of the unit.

4. Setting the date and time

Lower the cover on the front of the unit.

Move the selector switch to the CLOCK SET position.

Press the

buttons to select the day.

Press the

buttons to select the month.

Press the

buttons to select the year.

Press the

buttons to select the hour.

Press the

buttons to select the minute.

Press the

buttons to select 5/2D, 7D or 24H

The date, time and function are now set. Move the selector switch to the

RUN position to run the program, or to the PROG SET position to change

the program setting.

Important: Keep this document

This 2 zone programmer is designed to

provide ON/OFF control for 2 zones, with

the value added application of in built

frost protection.

5/2D

P2 ON

P2 OFF

P3 ON

P3 OFF

12:00

17:00

P2 ON

P2 OFF

P3 ON

P3 OFF

24H

P2 ON

P2 OFF

P3 ON

P3 OFF

RUN

CLOCK

PROG

SET

Press

EPH Controls Ireland

Sitecast Industrial Estate, Pouladu ,

Cork, T12 W665, Ireland

[email protected] www.ephcontrols.com

5. ON/OFF period selection

There are 4 modes available on this programmer for users to choose for their

individual application.

AUTO

The programmer operates 3 'ON/OFF' periods per day.

ALL DAY The programmer operates 1'ON/OFF' period per day.

This operates from the rst ON time to the third OFF time.

The programmer is permanently on. **ON**

OFF

The programmer is permanently o . **OFF**

Lower the cover on the front of the unit. By pressing the

you can change between AUTO / ALL DAY / ON / OFF for Zone 1.

23:00

Repeat this process for Zone 2 by pressing the

6. Adjusting the program settings

Lower the cover on the front of the unit.

Move the selector switch to the PROG SET position.

You can now program Zone 1.

Press the

Repeat this process to adjust the ON & OFF times for P2 & P3.

Press

When completed, move the selector switch to the RUN position.

7. Copy function

Copy function may only be used if the timeswitch is in the 7d mode.

Lower the cover on the front of the timeswitch.

Move the selector switch to the PROG SET position.

Set the ON & OFF times for the day of the week you wish to copy from.

COPY

Press

button for 2 seconds. The next day of the week will begin to

Holiday

ash.

Press the

button to copy the ON & OFF times to this day.

Press the

button to skip a day.

ON & OFF times can be copied to muliple days by using the

Press the

button when copying has been completed.

When completed, move the selector switch to the RUN position.

EPH Controls UK

Unit E4, Welland Business Park, Valley Way, Market Harborough,

Leicestershire, LE16 7PS, United Kingdom

[email protected] www.ephcontrols.co.uk

Page 1 of 2

Operating Instructions

CAUTION!

Before commencing, disconnect the

device from the mains. There are parts that

carry mains voltage behind the cover. Never

leave unsupervised when it is open. (Prevent

non specialists and especially children from

gaining access to it.)

Never remove this product from the

electrical baseplate. Disconnect from mains

supply in the event of any damage to any

buttons. Do not use sharp tools to push any

button.

buttons to adjust the P1 ON time.

buttons to adjust the P1 OFF time.

and repeat the above process to adjust for Zone2.

button,

button.

RUN

CLOCK

PROG

SET

Press

RUN

CLOCK

PROG

SET

button.