DieHard 200.71465 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Batterieladegerät DieHard 200.71465 herunter. DieHard 200.71465 16 Seiten. 60/20/2 amp fully automatic battery charger 275/125 amp engine starter with battery tester

Seite drucken

3. Taptheotheraxlecapontotheopposite endofthe

axleandplacetheaxleassembly o ntothebottom of

thecharger. P lace oneendofthebracket i ntoslot,

thenplace theaxleassembly under

each bracket.

Fasten the other side of the brackets using the two

10-32 screws provided.

To attach the handle:

Turn the charger right side up onto its foot and wheels.

Remove the two top screws from each side of the

charger and align with the screw holes on the handle.

Attach the handle using the same screws.

Plugging

it in

Electrical Shock Hazard

Be sure that power cord fits properly into outlet.

If not, have a qualified technician

install a proper

outlet. Never alter the AC cord or plug provided.

Improper connection can result in electrical shock.

Your charger should be grounded to reduce the risk

of electrical shock.

Your charger is equipped with an electrical cord that

has an equipment grounding conductor and a ground-

ing plug designed to be used on a 120 volt circuit. The

plug must be plugged into an outlet that has been

properly installed and grounded in accordance with all

local codes and ordinances.