DieHard 28.7123 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Batterieladegerät DieHard 28.7123 herunter. DieHard 28.7123 18 Seiten. 12v manual battery charger & engine starter

Seite drucken

1. Preparing to Charge
2. Assembly Instructions
3. Features/Control Panel
4. Operating Instructions
5. Troubleshooting

9.4

Mount the axle to the charger

on the bottom of the charger. Place the axle assembly under each bracket.

Attach the brackets using the two, 10-32 thread cutting screws provided.

NOtE: Be careful not to drop the brackets inside of the charger case.

9.5

attach the handle

handle until it is centered at the top. Turn the charger right side up onto its foot

and wheels. Align the handle so the screw holes are aligned with the screw

holes on the upper back corners of the charger. Attach the handle using the

four Phillips head screws provided.

: Place one end of each bracket into the slot

: If the charger came with a plastic grip, slide that onto the

•