Axis Electronics NANO-300G5 Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Skalen Axis Electronics NANO-300G5 herunter. Axis Electronics NANO-300G5 17 Seiten. Electronic weighing scale
Seite drucken
counting is measured. The zero will function within 5% of the internal zero
setting. The scale has an automatic auto-zeroing function to account for
minor drifting or accumulation of material on the platform. This auto-zero
range can be configured in the user setup. However you may need to press
the ZERO/ENTER key to rezero the scale if small amounts of weight are shown
when the platform is empty.
PRICE BUTTON
5.4
Price Button: This button is used to enter and calculate the total price of the
material being weighed according to the price entered. This button is also
used to select digits on the left side while
entering values in setting mode or calibration
modes.
5.4.1
PRICE ENTRY: Press and hold the P
button for 2 seconds. The display will
show "00000" with the last digit blinking. You can change the value
of the blinking digit by pressing the M
or up arrow key. Assuming that you
need to set a value of say "5400" press
the Up arrow key 5 times and press P
(or left arrow) button When you press
the left arrow the blinking digit moves
towards left. Using the up arrow and
left arrow key enter the value "5400" and
press ZERO
weight say 100g on the pan and press P
button. The value calculated with blink 3
times
to confirm. Now put a
9
NANO Series Precision Balance