Acculaim Dyna Drum HO Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen Acculaim Dyna Drum HO herunter. Acculaim Dyna Drum HO 20 Seiten.

Main menu items (Dyna Drum HO color changing models)

Allows you to set the DMX start address for this fixture. This fixture uses four

DMX channels (for Red, Green, Blue and White), beginning with the one

chosen here. See page 13.

Displays the current firmware version for the fixture. No changes are possible

within this entry.

Displays the 'Fixture Hours' or total operating time (in hours) since the fixture

was manufactured.

Displays the current internal temperature of the fixture (in degrees

Centigrade).

Determines whether the menu display should remain on when the fixture is

in standby mode.

Performs an auto test so you can check that all emitters are operating

correctly.

Inverts the menu display so that it reads correctly when the fixture is inverted.

See page 14.

Enables the keylock feature to restrict access to the menu. Note: Be sure to set

the lock number within the PASS entry before changing this option to on. See

page 13.

Allows you to set a password number between 0 and 9999 for use when the

Loc feature is enabled. See page 13.

Allows you to bias the red, green and/or blue intensities in order to achieve

a particular white balance that will be reproduced when RGB mixes are

requested - either via internal or external control. See page 14.

Determines fixture solo behavior for when there is no external control input.

Options are: IntL - displays static colors or chases. bLnd - blacks out the emitters

if control is lost. LASt - retains last state if control is lost. See page 11.

Allows you to create a color chase that will be displayed when the SoLo item

is set to IntL. First set the chase Speed (0 to 240) and then set the Fade time

(0 to 240). The resulting out will be shown once the menu exits. See page 11.

Allows you to choose from a pre-mixed static color palette (CL1 to CL32) or

mix your own color using the nAnu (manual) option. See page 12.

Determines the wireless channel that should be used when the optional

wireless control system is fitted. Reserved for future use.