Olympus C 725 - CAMEDIA Ultra Zoom Digital Camera Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Digitalkamera Olympus C 725 - CAMEDIA Ultra Zoom Digital Camera herunter. Olympus C 725 - CAMEDIA Ultra Zoom Digital Camera 2 Seiten.

Seite drucken

TAKING PICTURES

There are two ways to compose your subject: with the

viewfinder or using the monitor. Depending upon the shooting

situation, there may be advantages to each method. Please

refer to the printed Basic Manual for more information.

Taking still pictures

• Remove the lens cap. Set the mode dial to

press the POWER switch.

• Point the camera towards a subject, and place the subject

on the AF target mark.

• Press the shutter button halfway.

Green lamp

Number of storable still pictures

When the focus and brightness (exposure) are locked, the

green lamp lights.

To warn you of camera shake,

will blink. In this case, press

the

(flash) switch to pop up the flash. If the

mark lights, the flash will fire automatically.

• Press the shutter button completely to take the picture.

A short beep confirms your picture has been taken.

VIEWING AND ERASING

PICTURES

With this digital camera, you can easily view the photos

you want—and delete the ones you don't.

Viewing Pictures

There are two ways to access the Playback mode:

•

If the camera is off, set the mode dial to

the POWER switch.

•

If the camera is in the shooting mode, press

rapid succession (Quick View).

The last picture taken appears in the monitor. Use

to scroll though all the images saved on your

xD-Picture Card.

CONNECTING THE CAMERA

TO A COMPUTER

TIP:

Olympus recommends using the optional AC adapter to ensure

a consistent power supply when downloading images.

Windows 98 users must install the "USB Driver for

Windows 98" software before connecting this

digital camera to the computer.

Refer to the Software Installation Guide for

complete information.

Make sure that the camera is turned off before

connecting it to your computer.

INSTALLING THE CAMERA

SOFTWARE

You've now mastered the basic functionality of your new Olympus

digital camera! You are now ready to begin exploring the

possibilities that digital photography brings to your computer.

Activities such as photo editing, printing, and much more are

only steps away!

About the Olympus CAMEDIA Master CD-ROM

Your Olympus digital camera comes bundled with a suite of software and

documentation. The CD includes:

• CAMEDIA Master : To download pictures from the camera, view,

organize, retouch, and print your digital photos and movies.

• USB Driver for Windows 98: This utility must be installed to allow the

camera to communicate with your computer if it uses the Microsoft Windows 98

operating system.

• Olympus

Digital

Camera Reference Manual: A complete

reference guide in digital form, saved on the CD in PDF format.

You are now ready to install the computer software.

• Open the CAMEDIA Master CD-ROM package and locate the Software

Installation Guide in the language you wish to use.

•

Continue to follow the step-by-step instructions for installing the software, and

enjoy your new digital photo processing capabilities!

Icons representing camera settings appear on the

monitor, telling you important information such as the

Flash and record modes, battery life, and the number

of frames remaining.

• How to turn off only the monitor

T Press the

and

off. If

is pressed again, the monitor turns on.

Zooming

This digital camera features a zoom lens, allowing

you to get closer to action, or capture wide-angle

shots and get everything into the picture.

Shoot a wider view

AF target mark

picture (wide-angle)

Press the zoom lever

toward W to zoom out.

(flash stand-by)

When you are finished reviewing your pictures:

•

Press POWER to turn the camera off.

•

To return back to the shooting mode, press the shutter

button halfway.

Erasing Pictures

The beauty of digital photography is your ability to keep

the photos you want, delete the rest, and reuse empty

and press

memory space to take new pictures. This digital camera

offers two ways to permanently erase unwanted digital

photos:

twice in

Single-Frame Erase: Deletes only the picture currently

displayed in the monitor.

Once erased, pictures cannot be restored.

Olympus makes it simple to connect this digital camera to

your computer.

• Turn the camera off.

• Plug the supplied USB cable into the ports on your

camera and computer as illustrated at right.

•

Set the mode dial to

does not turn on automatically.

The camera starts communicating with the PC.

Icon

No icon Auto-flash

(monitor) button. The monitor turns

Zoom in on a

subject (telephoto)

Press

Press the zoom lever

shutter button depressed halfway, the flash is ready to fire when

toward T to zoom in.

the orange lamp next to the viewfinder lights steadily. When the

orange lamp is blinking, the flash is charging.

Number of Storable Pictures

Your digital camera can handle xD-Picture Card from 16 MB to

512 MB. The number of storable pictures depends on the image

Zoom lever

quality selected.

See the Reference Manual for complete descriptions of each

record mode and the storable frame capacity for the various

resolution modes and xD-Picture Card capacities.

TIP:

the number in the lower right corner. Remember, you can always delete unwanted

pictures to make room for more. (See Step 5.)

All-Frame Erase: Deletes all pictures on the xD-Picture Card in one

operation, except for pictures you have protected.

and press POWER if the camera

Additional Camera Features

This digital camera offers a host of advanced features to expand your creativity. Here's just a small

sampling. See the Basic Manual for details on these capabilities, and more!

• 3 Scene Program Shooting Modes: This camera has 3 shooting modes to choose from

depending on the shooting conditions and the effect you want to achieve.

• Macro Mode: For close-ups as tight as 4 inches (10 cm), select Macro Mode.

• Sequential shooting: Take a rapid succession of still pictures.

• Still Picture Editing: Edit still pictures and store them as new pictures.

• Movie Mode: Yes, this digital camera records movies! (Movie Mode does not record sound.)

• Two-in-one Pictures: Combine two separate images taken in succession and store them as a

single picture.

• Close-up Playback: Enlarge the pictures in the monitor to check details of the selected image.

• Index Display: View several thumbnail pictures on the monitor at once.

• Protecting Pictures: Prevents you from accidentally erasing photos.

• Video Playback: View your pictures and movies on a television monitor.

• Panorama Shooting: Connect overlapping images into a single picture using the panorama

mode and Olympus CAMEDIA Master software.

TIP: Remember to complete and return your Registration Card, and keep all camera documentation handy.

Technical Support (USA)

1-888-553-4448 (Toll-free)

8:00 AM - 10:00 PM ET

Monday - Friday

Flash Modes

This digital camera features multiple flash modes.

Flash Mode

Description

The camera automatically decides if the flash is needed.

Red-eye

Reduces incidence of red-eye by emitting pre-flashes to

Reduction

shrink pupil size before firing the main flash. The strobe

Flash

effect is normal operation for this mode.

Fill-in Flash

The flash always fires with every picture.

Night scene

Adjusts the flash for slow shutter speeds.

Adjusts the flash for slow shutter speeds, and minimizes

Night scene

with red-eye

red-eye.

reduction flash

Turns the flash off for times when flash photography is

Flash Off

prohibited or not desired. The flash never fires.

to cycle through the available flash modes. With the

To find out how many frames you have left, turn on the monitor and look for

•

Set the mode dial to

(playback mode) and press the

POWER switch.

•

Select a picture you wish to erase by using the arrow pad.

• Press

to select YES, and then press

TIP: Images can also be erased while in the "Quick View" mode

described in step 5A. This makes it easy to quickly erase a picture that

you just took.

Once erased, pictures cannot be restored.

•

Set the mode dial to

(playback mode) and press the

POWER switch.

• Press

, then press

to select MODE MENU.

• Use

to select the CARD tab, then press

the CARD SETUP screen.

• ALL ERASE should be highlighted. Press

• As a safeguard, this digital camera will ask you to select

YES or NO to confirm erasing, as this process permanently

deletes all unprotected pictures. Select YES and press

European Technical Customer Support

00800-67 10 83 00 (Toll-free)

+49(0)1805-67 10 83 or +49(0)40-23 77 38 99 (Charged)

9:00 AM - 6:00 PM MET

Monday - Friday

2004 OLYMPUS CORPORATION

twice to access