Olympus CAMEDIA C-8080 Wide Zoom Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Digitalkamera Olympus CAMEDIA C-8080 Wide Zoom herunter. Olympus CAMEDIA C-8080 Wide Zoom 2 Seiten. C-8080 wide zoom quick start guide (portuguese)
Auch für Olympus CAMEDIA C-8080 Wide Zoom: Betriebshandbuch (4 seiten), Betriebshandbuch (5 seiten), Benutzerhandbuch (47 seiten), (Portugiesisch) Praktischer Leitfaden (2 seiten)

Seite drucken

Olympus CAMEDIA C-8080 Wide Zoom Schnellstart-Handbuch

1AG6P1P1919--

QuickStart Guide

C-8080 Wide Zoom

START HERE

It is strongly recommended that you follow these step-by-step

numbered instructions to set up and quickly begin using your

new Digital camera.

For more detailed instructions on advanced features, please refer to

the printed Basic Manual included in your package, or the Reference

Manual on the CD-ROM.

Basic Manual (booklet)...Overview of camera functions

Reference Manual (CD-ROM)...Detailed instructions on handling the camera

PREPARING THE CAMERA FOR USE

Before you begin using your Olympus Digital camera...

Charging the battery

• The battery is not fully charged when purchased. Before use, be sure to

charge the battery with the specified provided charger (BCM-2).

Hold the battery with its terminals facing the charger and align the battery

with the guideline

on the charger as shown in the illustration. Slide the

battery into the charger.

Loading the battery

Note: The battery and xD-Picture Card compartments are

accessed by opening the respective compartment covers.

• Slide the battery compartment lock from = to ).

• Lift open the cover.

• Insert the BLM-1 lithium ion battery into the compartment as

indicated in the illustration here.

• Close the battery compartment cover and slide the battery

compartment lock from ) to =.

• To remove the battery, make sure that the camera is turned off

(the monitor and the viewfinder are off and the lens is retracted).

• The lock secures the battery when correctly loaded.

TURNING ON THE

CAMERA

The camera Mode dial is used to select the various

operation modes.

Turning the camera ON

(SHOOTING MODE)

• Remove the lens cap.

• Turn the mode dial until the mode you want to use is

aligned with the red line. Press the power switch. The

lens extends and the monitor turns on.

• To turn the camera off, Press the power switch again.

TIP

: To maximize battery life, the Digital camera features a

power saving mode in which the camera enters a sleep

mode after approximately three (3) minutes of non-use.

Setting the Date and Time

Set the date and time before using the camera for the

first time. This affects the way image file names are

created, and will conveniently include this information

with each picture.

• Set the mode dial to C and press the power

switch.

• Press ac to select the SETUP tab, then press d.

• Press ac to select X, then press d.

• Use ac to select the date format.

• Adjust the date and time in the appropriate fields by using

d to select the field, and ac to set the proper value.

Repeat this step until all date/time fields have been set.

Note: Time is entered using the 24-hour

format.

• Press

twice to set the date and time and exit the

menu.

VT688101

OLYMPUS AMERICA INC.

Two Corporate Center Drive, Melville,

NY 11747-3157, U.S.A.

http://www.olympusamerica.com/support

The following items are also included in the Digital camera package: Basic Manual, AV cable, RM-2 remote control, lens cap & string,

warranty card, registration card (not provided in some areas), and safety precautions booklet.

Battery

compartment

lock

The battery lock

secures the battery

when correctly loaded.

Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.

Card cover

Red line

Power switch

Mode dial

(OPTIONAL)

Camera Settings In Shooting Mode as shown in Monitor

Shooting mode

Battery check

Green lamp

Flash stand-by/

Camera movement warning/

Flash charge

Macro mode

Noise reduction

Flash mode

Flash intensity control

Sequential shooting

Self-timer/Remote control

Sound record

Record mode

UNPACKING THE BOX CONTENTS

Gather your Digital camera and the parts as shown in the illustration. You'll need these to complete the steps for the camera

set-up procedures that follow.

Digital camera

Strap

BCM-2 Lithium ion battery charger

Inserting the xD-Picture Card

The xD-Picture Card is where the camera stores your pictures and is

available in a variety of memory capacities. The pictures you take with

the camera remain on the xD-Picture Card even when the camera is

turned off and/or the battery is removed.

• Open the card cover.

• Face the card the correct way and insert it into the rear card slot as

shown in the illustration. Push the card fully into the slot. The card will

lock into place when fully inserted.

• Close the card cover securely.

Confirm you have installed the battery and xD-Picture Card properly by setting the mode dial

to q and turning the camera on. The "NO PICTURE" message should be displayed in the

monitor. Turn the camera off.

Note: To remove, push the card all the way in to unlock it, then let it return slowly.

Battery

Attaching the strap and lens cap string

compartment

cover

Attach the lens cap string and strap to the strap eyelets on each side of the camera as

illustrated. Attaching the strap to the camera makes it easier to handle.

Hot shoe

Power switch

Mode dial

Zoom lever (WG/TU)

Custom button (z)

Strap eyelet

Diopter adjustment ring

Exposure compensation

Shutter speed

Exposure differential

Aperture value

AE lock

AE memory

1/ 1/200

200

F5.6

0.0

Metering mode

ISO

White balance

compensation

Scene modes

Hue/Sharpness

Saturation/Contrast

mode

Memory gauge

3264*2448

Card

Number of storable

still pictures

Resolution

AF target mark/

Metering target mark

Olympus Europa GmbH

Wendenstrasse 14-18,

20097 Hamburg, Germany

http://www.olympus-europa.com

BLM-1 Lithium ion battery

CAMEDIA Master CD-ROM

Includes Reference Manual

in PDF format

(OPTIONAL)

Ring

Stopper

Shutter button

AF illuminator

AF sensor

Flash

Microphone

AEL button (AEL)

Lens

Remote control receiver

Self-timer/Remote control lamp

Self-timer/Remote control button (Y/<)

Erase button (S)

Speaker

Tripod socket

Battery compartment lock

Battery compartment cover

Monitor

Camera Settings In Playback Mode as shown in Monitor

Print reservation/

Number of prints(still picture)

Movie(Movie mode)

Card

Battery check

3264*2448

Resolution

F5.6

1/200 0.0

1/200

Aperture

value

Shutter speed

'04.04.17 15:30

http://www.olympus.com/

USB cable

xD-Picture

(gray color)

Card

Notch

Flash pop-up button

Strap eyelet

AF/Macro/MF button (AF/&/MF)

Protect button (0)

Flash mode button (#)

Rotation button (y)

Metering button (4)

Print button (<)

Exposure compensation button (F)

Information display button (INFO)

White balance button (WB)

Record mode button (K)

Viewfinder

Control dial

QUICK VIEW button

Arrow pad (acbd)

OK/Menu button (e)

Card cover

Monitor button (f)

Card button (CF xD)

Card access lamp

Connector cover

Sound record

Protect

Record mode

0.0

Exposure compensation

White balance

ISO

Date and time

File number (Still picture)

Playing time/

Total recording time

(Movie mode)