Olympus D150 - CAMEDIA D 150 Brio Zoom Digital Camera Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Digitalkamera Olympus D150 - CAMEDIA D 150 Brio Zoom Digital Camera herunter. Olympus D150 - CAMEDIA D 150 Brio Zoom Digital Camera 2 Seiten. Olympus camedia digital camera quick start guide
Checking the Package Contents
First make sure that all the provided accessories listed below are
included in the package. If anything is missing or damaged, contact
your local Olympus representative immediately.
Camera
CD-ROM
CR-V3 lithium
Strap
battery pack
Video cable
USB cable
SmartMedia
Basic Manual/Warranty/Registration
Instructions
Card (North America only)/Authorized
Distributors List/Sefety Precautions/
Battery Handling/Quick Start Guide
(this publication)
SmartMedia (8 MB)
Static-free case
Labels for SmartMedia
Write-protect seals for
for SmartMedia
(2 pieces)
SmartMedia (4 pieces)
Attaching the Provided Strap
Loading the Battery and Card
(SmartMedia)
1.
Make sure the lens barrier is
closed.
Card
cover
If the lens barrier is open, slide it to the
closed position.
Lens barrier
Push down the flash to lock it in place.
Battery compartment cover
2.
5.
Slide the battery compartment
Open the card cover.
cover in the
direction of the
arrow q,
and lift the
cover in the
direction of
the arrow w.
6.
3.
Insert the battery in the direction
Insert the card as far as it will go in
shown in the
the direction shown in the figure.
figure.
The insertion
direction is
indicated on
the seal inside
the card cover.
4.
Close the battery compartment
Insert the card completely
cover in the direction
until a slight click is heard
and the card is locked in
of the arrow q,
place.
and press the
7.
Close the card
cover in the
cover until it
direction of
clicks.
the arrow w
until it clicks.
Shooting Pictures
1.
Open the lens barrier.
Slide the lens barrier until the flash pops up; the camera will turn on and the
lens will come out.
Lens barrier
2.
Hold the camera, and look through the
viewfinder.
3.
Press the shutter button halfway (half-press) to make sure the green lamp on
the right of the viewfinder lights.
When lights:
The subject is in focus. You can shoot.
When blinking:
The subject is out of focus. Hold the camera again, and
half-press the shutter button.
Viewfinder
Green lamp
4.
Press the shutter button all the way
(full-press) to take the picture.
The shutter is released and the
picture is taken.
Once the picture has been taken, it
is displayed on the monitor for a
short time.
The flash fires automatically in low
light situations (when AUTO is set).
Monitor
Using the Flash
1.
Open the lens barrier.
Slide the lens barrier until the flash pops up; the camera will turn on and the
lens will come out.
2.
Press the
OK/menu button.
The monitor shows the Shooting mode menu.
Arrow pad
Displayed menu
1 /3
AUTO
OFF
DIGITAL ZOOM
OFF
SELECT
END
OK
Press
Monitor
3.
Select
by pressing the
or
arrow pad key.
The default setting is Auto-Flash.
1 / 3
AUTO
OFF
DIGITAL ZOOM
DIGITAL ZOOM
OFF
SELECT
END
OK
4.
Each time you press the
or
arrow pad key, the flash mode changes:
Auto-Flash ➔
Red-Eye Reduction Flash ➔
Fill-In Flash ➔
Night Scene ➔
Flash Off. Select one of these modes.
1 / 3
Display
AUTO
changes as
key is pressed.
Note: For the function and effect of each flash mode, refer to Page
DIGITAL ZOOM
57 of the camera's Reference Manual.
5.
When you have made your selection, press the
OK/menu button.
The desired flash mode is set.
OK/menu
button