Olympus DIGITAL VOICE RECORDER WS-200S Anleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Sprachaufzeichnungsgerät Olympus DIGITAL VOICE RECORDER WS-200S herunter. Olympus DIGITAL VOICE RECORDER WS-200S 10 Seiten. Ws-100 instrucciones (español)
Auch für Olympus DIGITAL VOICE RECORDER WS-200S: Anweisungen (2 seiten), Gebrauchsanweisung (2 seiten), (Englisch) Anweisungen (2 seiten)
Seite drucken
Recording
• To Pause Recording
T o P a u s e
Press the REC button during recording.
•» "PAUSE" appears on the display and the recording/playing lamp
flashes.
T o R e s u m e R e c o r d i n g
Press the REC button again.
*• Recording will resume at the point of interruption.
• Recording from External Microphone or Other Devices
The external microphone and other devices can be connected and the
sound can be recorded.
• When the external microphone is connected to the microphone jack of the
recorder, the built-in microphone will not operate.
• When connecting an external microphone or other external equipment to the
microphone jack, choose adequate equipment, such as a mono microphone (optional).
Notes
• If "FULL" appears on the display, you cannot record. In such a case, erase unnecessary files or download
to PC.
• If the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations.
Put a notebook or other item between the table and the recorder for clearer recording.
• Even if you press the FOLDER/MENU button, the display will not change to current recording time if the
remaining recording time is 5 minutes or less.
• A beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10 seconds
while recording.
• When remaining recording time is less than 60 seconds, the recording/playing display lamp starts flashing
in red. When the recording time is decreasing to 30 or 10 seconds, the lamp flashes faster.
• The recorder will enter Stop mode if it has been left paused for 60 minutes or longer.
• In case of difficult acoustic conditions or low speaker's voice, recording in €ID)HQ or HO is recommended.
Also, usage of an external microphone (sold separately) could improve the quality of recordings.
• The input level cannot be adjusted on this recorder. When you connect the recorder to an external
device, execute a test recording and adjust the output level of the external device.
• LCD Display Information
You can select an option for the display of the recorder. This help review and confirm different
recorder settings and file information.
State of the
Operation
recorder
While in stop
Press and hold
the STOP button
mode
While in
Press the FOLDER/
record mode
MENU button
Press the FOLDER/
While in
playback mode
MENU button
Press the FOLDER button to
choose a folder.
Press the REC button to start
recording.
The recording/playing lamp turns red, and
recording starts.
• If you start recording atter inserting the
earphone into the earphone jack on the
recorder, you can hear the sound being
recorded. The sound volume on the recording
monitor can be adjusted by pressing the VOL
(+) or VOL (-) button.
Press the STOP button to
stop recording.
New recordings are saved as the last file
in the folder.
While holding the button down, the number of all files
lights up and the remaining recording time and the
remaining memory space are displayed by turns.
The display switches between current recording time and
remaining recording time.
Playing time -> Remaining playing time -> Recording date
of the file -> Recording time of the file -» Playing time .. .
- 4 -
Display
*